20C50 GT Airmix® Paint Pump
- Suction rod or gravity hopper
- Heavy duty air changeover valves
- GT seal for water based and high solid content.
Designation | Value | Unit: metric (US) |
---|---|---|
Pressure Ratio | 20/1 | |
Maximum Fluid Pressure | 120 (1740) | bar (psi) |
Maximum Air Pressure | 6 (87) | bar (psi) |
Air Consumption | 10.8 (6.4) | m³/h (cfm) |
Maximum Temperature | 60 (140) | °C (°F) |
Cylinder | 50 (1.69) | cc (oz) |
Sound Level | 78 | dBa |
Recommended Air Pressure | 2 - 5 (29 - 72.5) | bar (psi) |
Fluid Output at 30 cycles/mn | 1.5 (0.4) | l/min (gal/mn) |
Fluid Output at 20 cycles/mn | 1.0 (0.26) | l/mn (gal/mn) |
Fluid Volume per Cycle | 50 | cc |
Free Flow Rate | 3.0 (0.78) | l/mn (gal/mn) |
Fluid Output at 15 cycles / mn | 0.75 (0.2) | l/mn (gal/mn) |
Air Consumption at 30 cycles/mn at 4 bar (60 psi) | 10.8 | m³/h (cfm) |
Displacement Per Cycle | 50 (3.05) | cc (cubic inch) |
Motor Type | 500-4 | |
Air Inlet | F3/8" BSP / F3/8" BSP | |
Fluid Outlet | F 1/2" NPS / M1/2" JIC | |
Fluid Inlet | F 1/2" BSP / M26x125 | |
Number of Cycles per liter of products | 20 | |
Sealing Packing Upper and Lower GT polyethylene | ♦ | |
Height | 82 (32.3) | cm (in) |
Width | 35 (13.8) | cm (in) |
Depth | 21 cm (8.3) | cm (in) |
Wetted Parts: Hard Chrome SST, Standard SST, Carbide | ♦ | |
Weight | 17 (37.5) | kg (lbs) |
Designation | Setup | Fluid inlet | Suction Rod | Drain Rod | Paint filter | Air Regulator | Upper seal | Lower seal | Part number |
---|---|---|---|---|---|---|---|---|---|
20C50 PUMP GT SEAL W/M WITH FILTER AND RODS | Wall mounted | M 26x125 | Ø 23 | ♦ | ♦ | 2 | GT | GT | 151773100 |
Designation | Part number | |||
---|---|---|---|---|
Wall mounted support for bare pump | 044910121 | |||
Two Post Cart w/o plate | 051221000 | |||
Pump Mounting Plate with straps | 056100199 | |||
Gravity hopper 6 liters | 151140230 | |||
Stainless steel Suction rod Ø23 M26 plunging tube length elbowed 570 mm | 149596150 | |||
Stainless steel Suction rod Ø23 M26 plunging tube length 1000mm elbowed (for 200 liters drums) | 149596160 | |||
Stainless steel drain rod Ø16 elbowed F18 x 125 | 049596000 | |||
Fluid filter 3/8 Mesh 6 | 155580300 |
Designation | Maximum output pressure(bar (psi)) | Gun type | Tip | Hoses included | Swivel fitting | Mounting | Packing material | Output filter | Suction rod | Part number |
---|---|---|---|---|---|---|---|---|---|---|
PACK 20C50 GT W/M & Xcite®+120B & ROD & HOSE 7.5M | 120 (1740) | Xcite®+ 120 | - | 7.5 m (24 ft) | • | Wall | GT | • | Ø 23 | 151260973 |
Designation | Part number | |||
---|---|---|---|---|
Seal kit for 500-4 air motor | 146260990 | |||
Maintenance kit for 500-4 air motor | 146260995 | |||
Seal kit for C50 hydraulic section (GT/GT) | 144950097 | |||
Full maintenance kit C50 hydraulic section (GT/GT) | 144950098 | |||
Ball Ø 16, 316L stainless steel | 907414142 | |||
Ball Ø 9.52, 316L stainless steel | 907414623 |
Format : application/pdf
Size : 7Mo
Format : application/pdf
Size : 421Ko
Format : application/pdf
Size : 499Ko
Format : application/pdf
Size : 3Mo