TRP 502 Robotic Dual Robotic Electrostatic Spray Gun
For more than 35 years, the TRP gun has been the standard in the world of automotive finishing, often
copied but never equaled.
|Designation||Value||Unit: metric (US)|
|Maximum Material Pressure||10||bar (psi)|
|Standard Material Supply Pressure||6 - 8||bar (psi)|
|Maximum Paint Flow||1200||cc/min (gal/min)|
|Standard Paint Flow||800||cc/min (gal/min)|
|Minimum Paint Flow||200||cc/min (gal/min)|
|Maximum Air Pressure||6||bar (psi)|
|Air Consumption||14 - 80||m3/h|
|Transfer Ratio||30 - 60||%|
|Paint Resistivity (min-max)||>3||MOhm.cm|
|Viscosity Scale (min-max)||14 - 60||seconds FORD Cup#4|
The ATEX regulation aims at improving the health & safety or workers potentially at risk from explosive atmospheres.
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing & sealing for composite & plastic parts