Reverse flush is a block that dumps and rinses the material supply system without going through the sprayer.
Reverse flush comes in 2 versions: Remote and Built-in. It can be installed within all the paint unit configurations (depending on the distance betweem the pump and sprayer).
- Remote Reverse Flush Block
When the pump is placed far away from the sprayer (distance > to 1.5 m) (as in the case of the Slim Arm which no pump can be assembled) then the remote reverse flush block is used (ideally placed at a distance between 1 and 1.5 m from the sprayer).
- Built-in Reverse Flush Block
When the pump is placed close to the sprayer (distance < to 1.5 m) (as in the case of the Process Arm) then the reverse flush block is directly assembled onto the pump. The "built-in" reverse flush block is used. This configuration is optimal with a simple installation.