REGSMART Regulator for Semi-Viscous Materials
Optimized fluid passage design for low shear and less dead zone areas
|Designation||Value||Unit: metric (US)|
|Weight||4 (9)||kg (lbs)|
|Fluid Passages||Ø6 / Ø8 / Ø12||mm|
|Inlet Pressure Maximum||400 (5802)||bar (psi)|
|Outlet Pressure - Regulated Range||25 - 275 (363 - 3989)||bar|
|Air Pressure Maximum||6 (87)||bar|
|Max Working Temperature||60 (140)||°C|
|Material Inlet & Outlet||3/4"G|
|Wetted Parts - Stainless Steel||PTFE, FFKM|
|Average Output||0.9 / 3 / 9 (0.24 / 0.79 / 2.38||l/mn (gal/mn)|
Format : application/pdf
Size : 502Ko
Format : application/pdf
Size : 3Mo
Solid lubricating additives, including graphite, are added to some grease to improve its lubricating properties.
Silicone grease is commonly used for lubricating & preserving rubber parts, such as O-rings. Additionally silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon-based grease. It functions well as a corrosion-inhibitor & lubricant for purposes that require a thicker lubricant. Thermal grease often consists of a silicone grease base along with added thermally conductive fillers. It is used for heat transfer abilities rather than friction reduction.
Silicone sealants can be used in two or three components for increasing mechanical capabilities.
Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.
Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.
Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.
Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.
Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.
Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.
Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.
Additional accelerator used for polyurethane or silicone adhesives speed up the chemical reaction between the adhesive & the material they are bonding. Used often in the field where temperatures are lower to accelerate the bonding times.
Two-component polyurethanes (also called 2C PUR) have the advantages of single component polyurethane adhesives, but cure more quickly through larger gaps & are not dependent on moisture/heat for curing.
Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.
In general, users can count on silicone adhesives to produce bonds that can withstand high temperatures (in some cases up to 600°F), remain flexible even after curing & resist chemicals including water.
Two-component silicone has the advantages of single component silicone adhesives, but cure more quickly through larger gaps & are not dependent on heat for curing.
Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.