PU 2160 F Airmix® Mixing & Dosing Paint Pump
- Easy to work with
- Always fresh material on demand
- Durable pump design
This PU 2160F Mechanical Meter mixing solution for Airmix® applications includes pumping, metering (Plug & Spray). The PU 2160F pump is a very economical solution with fast (small fluid section) and easy (manifold) flushing and color changing with a low solvent consumption.
The PU 2160 F fixed dosing ratio pump is used to apply two component material for Airmix ® spraying. The proportioning pump is mounted on a cart and is composed of :
The hardener fluid section is built with Flowmax® bellow technology for long term usage even with moisture sensitive materials. This pump measures and mixes 2 components A and B to a single defined volume proportion.
Both fluid sections for base and hardener are coupled to an air motor. Their sizes have been calculated in order
that each delivers the base A and the hardener B to the predetermined proportion. As soon as the operator stops spraying, the proportioning pump stops cycling in order to always deliver frech material on demand.
We offer a choice of 4 mixing ratio of 1:1, 2:1, 5:1and 10:1. Every wetted parts are in standard stainless steel for 1/1 and 2/1 dosing ratio range and in 316L stainles steel for both 5/1 and 10/1 dosing ratio range, makes it compatible with water-based materials.
This dosing units is designed to be installed inside a spray booth because it is Atex approved.
|Designation||Value||Unit: metric (US)|
|Ratio||10/1 - 15/1 - 18/1 - 20/1||X/1|
|Maximum Fluid Pressure||120 (1700)||bar (psi)|
|Number of Products||2||base-catalyst-solvent|
|Air Inlet||F 3/8 BSP|
|Fluid Outlet||1/2 JIC|
|Fluid Viscosity (min-max)||180 (800)||in CA4 seconds (or centipoise cps)|
|Number of A Components||1||Min/Max|
|Number of B Components||1||Min/Max|
|Weight||60 (132)||kg (lbs)|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery