Nanogun Airmix® Manual Electrostatic Spray Gun
- Airmix® technology for productivity and outstanding transfer efficiency of 93%
- Electrostatic charge delivers more paint savings
- Lightweight and ergonomically designed
The Nanogun Airmix® manual electrostatic spray gun combines all the SAMES KREMLIN skills and knowledge for spraying liquid paints at medium and high pressures with additional air. It is perfect for many markets, such as aerospace, agricultural, construction, metallic furnitures, wood, transportation & energy. Nanogun Airmix® is excellent for spraying medium viscosity paints. The Nanogun Airmix® makes a difference with its lightweight, ergonomic design & excellent wraparound effect, thus improving the overall operator experience.
Paint may be supplied to the Nanogun Airmix® by using a pump. When spraying, the charged paint drops follow the lines of the electric field to the part. Electrostatics result in paint savings and wraparound effect reducing overspray & pollution. Adding compressed air to it allows enhanced penetration into cavities & a finer spray pattern.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||120 / 200 (1740 / 2900)||bar (psi)|
|Recommended Fluid Pressure||50-120 / 90-200 (720-1740/1300-2900)||bar (psi)|
|Maximum Air Pressure||7 (101)||bar (psi)|
|Recommended Air Pressure (min)||5 (72)||bar (psi)|
|Maximum Fluid Temperature||40 (104)||°C (°F)|
|Weight||670 (23.6)||g (oz)|
|Recommended Material Viscosity Range||20-120||s CA4|
The ATEX regulation aims at improving the health & safety or workers potentially at risk from explosive atmospheres.
Since 1975, Airmix® combines conventional and high pressure Airless technologies advantages. It is today's industry standard for medium pressure atomization.
Format : application/pdf
Size : 906Ko
Format : application/pdf
Size : 1Mo
Format : application/pdf
Size : 19Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Anti-fouling paint, or bottom paint, is a specialized coating applied to the hull of a ship or boat to slow the growth of sub-aquatic organisms that attach to the hull & can affect a vessel's performance & durability.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
This solution is a simple AIRMIX® concept using our ISOCUBE for spraying water-based paint with an additional electrostatic effect