GNM 300 High voltage control module
- Compact design for easy integration
- Network modules available for any PLC
- Easy to wire and connect
The GNM 300 is a control module to be installed into electrical cabinet, only requiring 24V for power supply.
The open network architecture allows to communicate with all available fieldbus technologies.
Thanks to the network communication, your installation may send all settings and receive all logs & alerts for your supervision system. The Industry 4.0 is already here !
The optionnal remote screen can fixed in front door cabinet to allow to monitor and set the voltage and current consumption.
The GNM 300 is available for all our rotary bell sprayers: PPH 707, Accubell 709 EVO, PPH 308, Nanobell2.
|Designation||Value||Unit: metric (US)|
|Weight||1.14 (2.51)||kg (lbs)|
|Height||118,50 (4.66)||mm (in)|
|Width||111 (4.37)||mm (in)|
|Depth||131,7 (5.18)||mm (in)|
|ATEX Certification||II (2) G [350 mJ < Ex < 2J]|
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
Improving the transfer efficiency of painting atomizers has been the aim of the electrostatic effect since the 1950's.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Protection, bonding, finishing & sealing for composite & plastic parts