E50 REXSON Plural component for encapsulating, bonding, sealing, potting.
- Supplies continuous freshly mixed material on demand
- Eliminates manual mixing errors
- Reduces hazardous material contact with the operator
|Designation||Value||Unit: metric (US)|
|Ratio||1/1 - 20/1||X/1|
|Maximum Fluid Pressure||40 (600)||bar (psi)|
|Maximum Fluid Output||3000 (105)||cc/min (oz/min)|
|Maximum Air Pressure||6 (90)||bar (psi)|
|Air Consumption||132 (78)||m3/h (cfm)|
|Number of Products||2||base-catalyst-solvent|
|Maximum Temperature||60 (122)||°C (°F)|
|Air Inlet||3/4 BSP|
|Number of Mixed Products||2||2K|
|Number of Products||2||Max|
|Fluid viscosity with pressure pots (min-max)||10 - 80000||cps|
|Fluid viscosity with pumps (min-max)||20000 - 300000||cps|
Process by which compressed material dispenses from a nozzle to form a cord. Used in engine sealing, gluing & mastic removal.
Potting technnogy is a process of filling a complete electronic assembly with a 2K liquid resin for resistance to shock and vibration, and for exclusion of moisture and corrosive agents.
Format : application/pdf
Size : 1Mo
Format : application/pdf
Size : 3Mo
Silicone sealants can be used in two or three components for increasing mechanical capabilities.
Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.
Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.
Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.
Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.
Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.
Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.
STP Polymers are the new generation environmentally friendly polymers that are replacing the isocyanate & solvent containing polyurethane resins to produce sealant & adhesive products that are safer & greener for the consumer & tradesman.
Hybrid Adhesive Sealants are one component formulations that form robust, permanent & flexible bonds offering great adhesion to many materials for reliable performance, are paintable when wet for fast process time, have a fast skin time for a tack-free surface, are isocyanate-free for reduced health & safety concerns & resist degradation from sunlight for excellent aesthetics.
In general, users can count on silicone adhesives to produce bonds that can withstand high temperatures (in some cases up to 600°F), remain flexible even after curing & resist chemicals including water.
Two-component silicone has the advantages of single component silicone adhesives, but cure more quickly through larger gaps & are not dependent on heat for curing.
Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.
MS Polymers are the next generation of silicones & mastics. Unlike their counterparts these products adhere well to most substrates without the use for specific primers. By using these products you can reduce the risk of application mistakes.