ASC Automatic airless® compact spray gun
- Premium Airless® application
- Heavy duty sustainability
- High functionality
ASC automatic spray gun provides superior atomization and is developed for high production at medium to high flow rates with low overspray for minimal paint waste. The ASC gun is the lightest stainless-steel automatic spray gun decreasing bearing wear on painting machines minimizing payload. Their compact design allows easy access to recessed part areas. You have a choice of 184 tips: Skill™ – super fine finishing Airless® tips, Flat for fine finishing and reversible Tip Top for protective coatings. The simplicity and quality of the material used guarantees low maintenance costs. ASC is well suited for applying harsh coatings (acid catalyzed, UV coatings) water-based, high viscosity 2K pre-mixed and abrasive type materials.
|Benefits per technologies||Transfer efficiency||Atomization quality||Flow rate|
|Airless® spraying||(with Skill™ tips)|
The ASC guns have a simple construction with only (10) parts for fast and easy maintenance (80% less than our competitors). Their built-to-last rugged construction comes with a selection of two different cartridges and extends the life of the gun to minimize MTBF (Mean Time Between Failures).
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||240 (3480) / 400 (5800)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Stainless Steel Body||♦|
|Fluid Inlet||M 1/2 JIC|
|Pilot Air with Quick Fittings||4x6|
High efficiency Airless® sprayer technology under high pressure for large projects without the added use of compressed air.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.
Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.
Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.
MS Polymers are the next generation of silicones & mastics. Unlike their counterparts these products adhere well to most substrates without the use for specific primers. By using these products you can reduce the risk of application mistakes.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Wood finishes (dye stains, sealers, varnishes...) give a desired appearance and protection. These layers have to be perfectly applied on the wood surface to prevent issues like blotching, haloing, striping, orange peel, and bubbling. We have various solutions available for every coating to help you solve these finishing issues while saving products!
Wood finishes (sealers, varnishes... for example) give a desired appearance and protection. Those layers have to be perfectly applied on wood surface to prevent issues like color matching, bubbling, orange peel... We have different solutions for every coating to help you solve those issues while saving products!