RPG Robotic Paint Gear Pump for Flow management
- Compact Design
- Fast Color Change
- High Reliability
The Robotic Paint Gear pump range "RPG" is used for the supply of liquid paints, when a regular and accurate flow is mandatory, either solvent-based or water-based, for all SAMES KREMLIN automatic sprayers. This pump comes in 3 capacities defined by the number of cubic centimeters of paint delivered per revolution:
These different models allow covering a flow range from 8 to 65 l/hour. The choice is made with respect to the target flow and the rotation speed range. We recommend to run at less than 120 rpm. The gear pump ensures a paint flow that is proportional to its rotation speed. In the case of a distribution system, the material pressure regulator is to be connected before the pump, whereas a flow meter is always connected after the pump. Upstream pressure facilitates priming but also ensures the flow corresponding to the capacity and speed of the pump.
All the RPG range is fully compatible with the UPside CCV color change block as well as the innovative PaintSave push-out technology from SAMES KREMLIN. To allow high flexibility, these pumps can also fit perfectly the robot motor coupling. The Robotic Paint Gearpump "RPG" is 15% lighter than our previous range of gearpump. New pressure sensors are available to monitor the process with a compact design to be integrated directly in the robot process arm.
A: Material flow in cc/min
B: Pump rotation speed in rpm
The curve indicates the flow of the pump with a back-pressure from 0 to 6 and from 6 to 10 bar. The area in green is the recommanded working zone.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||15 (220)||bar (psi)|
|Recommended Fluid Pressure||3 - 7 (45 - 100)||bar (psi)|
|Maximum Fluid Output||1080 (0,04)||cc/mn (cfm)|
|Minimum Output||30 (1)||cc/min (cc/oz)|
|Maximum Air Pressure||6 (90)||bar (psi)|
|Accuracy in Normal Conditions||± 2||%|
|ATEX Certification||II 2 G Ex h IIA T4 Gb|
|Nominal maximum rotation speed||120||rpm|
|Pump RPG 4.5cc (Equipped with bypass block)||270000152|
|Pump RPG 6cc (Equipped with bypass block)||270000153|
|Pump RPG 9cc (Equipped with bypass block)||270000154|
|Retrofit kit to install "RPG" instead of "Easyrincing" Pump||910032529|
|Retrofit kit to install "RPG" instead of "FCG" Pump||910032531|
|Bypass block equipped||270000155|
|UPvalve, pilot valve||910012239S|
|Main lip seal with O-Ring Seals||160000287|
|Oil Mesamol (1L)||H1HMIN037|
This innovative push-out technology utilizes the shuttle device inside the hose which saves great amounts of paint at each color change.
UPside CCV has all fittings and connections on the upper side of the color change block.
Format : application/pdf
Size : 1Mo
Format : application/pdf
Size : 17Mo
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
Protection, bonding, finishing & sealing for composite & plastic parts