1K Shot Meter Dispenser
|Width||20 (8)||mm (")|
|Depth||22 (8.5)||mm (")|
|Height||72 (28)||mm (")|
|Air Inlet||6 (1/4)||JICM (NPTF)|
|Fluid Inlet Port Size||438||mm (")|
|Air Inlet Maximum||9.6 (140)||Bar (psi)|
|Static Pressure Ratio||16:1||Ratio|
|Maximum Inlet Pressure||275 (4000)||Bar (psi)|
|Maximum Outlet Pressure||150 (2240)||Bar (psi)|
|Weight||11.5 (25.4)||kg (lbs)|
Process by which compressed material dispenses from a nozzle with blowing air to form a spiral cord. Product spirals overlap as dispensed to form a thin film in the crash (set with doors).
Process by which the compressed material is dispensed allowing anti-vibration product pads to be applied in the form of wide striping for sound deadening purposes.
Process by which compressed material dispenses from a nozzle to form a cord. Used in engine sealing, gluing & mastic removal.
Process by which compressed material dispenses from a nozzle to form a droplet. Material drops are positioned on hoods, doors & deck lids for anti-flutter bracket attachments.
Process by which the compressed material is projected allowing an application a greater distance from the work piece.
Silicone sealants can be used in two or three components for increasing mechanical capabilities.
Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.
Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.
Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.
Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.
Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.
Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.
STP Polymers are the new generation environmentally friendly polymers that are replacing the isocyanate & solvent containing polyurethane resins to produce sealant & adhesive products that are safer & greener for the consumer & tradesman.
Hybrid Adhesive Sealants are one component formulations that form robust, permanent & flexible bonds offering great adhesion to many materials for reliable performance, are paintable when wet for fast process time, have a fast skin time for a tack-free surface, are isocyanate-free for reduced health & safety concerns & resist degradation from sunlight for excellent aesthetics.
Additional accelerator used for polyurethane or silicone adhesives speed up the chemical reaction between the adhesive & the material they are bonding. Used often in the field where temperatures are lower to accelerate the bonding times.
Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.
Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.