02C85 Airspray Paint Pump
- Compact Design: easy to integrate into a finish workshop
- Rugged - high sealing capacity seals: compatible with a wide range of materials
- Can be used on a heated circulation system
|Designation||Value||Unit: metric (US)|
|Pressure Ratio||2 : 1|
|Maximum Fluid Pressure||10 (144.9)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Weight||5 (11)||kg (lbs)|
|Maximum Temperature||60 (140)||°C (°F)|
|Cylinder||85 (2.9)||cc (oz)|
|Fluid Output at 30 cycles/mn||2.6 (0.7)||l/min (gal/mn)|
|Free Flow Rate||5.1 (1.3)||l/mn (gal/mn)|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||2.1 (1.2)||m³/h (cfm)|
|Air Inlet||F 3/8" BSP|
|Fluid Outlet||M 3/8" NPS|
|Fluid Inlet||M 18x125|
|Number of cycles per liter of products||12|
|Sealing packing lower acetal resin seal||♦|
|Sealing packing upper GT cartridge with polyethylene packing||♦|
|Height||41 (16.1)||cm (in)|
|Wetted parts aluminum, stainless steel||♦|
|Width||28 (11)||cm (in)|
|Depth||17 (6.7)||cm (in)|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Format : application/pdf
Size : 356Ko
Format : application/pdf
Size : 6Mo
Format : application/pdf
Size : 6Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing & sealing for composite & plastic parts