The 55 Gallon Drum Agitator with gear driven air motor is used in small & large paint kitchens with the most robust elevator in the industry.
The automatic A28 low pressure spray gun benefits from the patented Superlife technology, recommended for enamels, high solids & solvent-free materials and strongly improving the wet parts lifetime.
This regulator has been designed to keep a constant pressure and a minimum product speed in a paint circulating line.
The use of this manual control pressure regulator is the best way to get a high working precision. With continuous control of the product pressure a constant production quality can be achieved. Designed for low to medium viscosity materials.
The manual drive regulator with integrated pilot allows to keep a constant pressure. The use of this regulator is the best way to get a very high working precision. With the continuous control of the product pressure, it allows a constant production quality. Designed for low to medium viscosity materials.
This regulator can be piloted directly by pressurized air, allowing to change the product pressure at any time on the assembly line. Designed for low to medium viscosity materials.
This regulator can be piloted directly by pressurized air, allowing to change the product pressure at any time on the assembly line. Designed for medium viscosity materials, this piloted control regulator is non stick coating.
Cyclix gear drive agitators for open top 200 liter (55 gal) drum featuring a stainless steel cover mounted on a single post elevator for quick material changes.
The side mounted Isolation Table allows coating and pumping systems to be isolated from the ground. It is used for multiple small pumps to feed out of 5 gallon pails.
M22 P HPA offers the widest projector choice to answer to most conventional spray needs. It is recommended for high-volume conventional spray applications or for high viscosity material.
M22 P HTV uses SAMES KREMLIN's unique Vortex technology to enhance low viscosity material spraying on sharply profiled surfaces. It is also HVLP compliant.
M22 P HVLP delivers a very high finish quality for low viscosity material and optimizes transfer efficiency with an outstanding operator comfort.
The M22 P WBE HPA is a reinforced gun designed to resist to highly-abrasive water-based coatings in time. The HPA technology allows its use for high-volume conventional spray or high viscosity material applications.
PDM 175 is a large capacity diaphragm pump, it is ideal for low pressure circulatings and feeding automatic guns.
PMP150 is our easiest pumping solution. It is a diaphragm pump (for application requiring a 1:1 ratio) and can be used with adhesive, medium viscosity or harsh coating.
The PMP 150 E is a diaphragm pump with a 1:1 ratio, which benefits from special balls and seats to pump abrasive water-based coatings.
The PMP 150 Transfer is a diaphragm pump, designed for fluid transfer applications. It can be used with low to medium viscosity material.
Our pressurized tanks are available from 5L (1.3Gal) capacity for economical solutions to feed Airspray guns (paints/adhesives) up to 52L (197 Gal) for the biggest application.
The S3 G is our most compact and light gun, designed for tight area applications and where touch-ups are required. It is also an ideal solution for small hands.
The S3 G is our most compact and ligth gravity gun designed for tight area applications and where touch-ups are required. S3 G HTI is the least energy consuming gun, and is HVLP compliant.
The S3 P is our most compact and lightest gun, designed for tight area applications and where touch-ups are required. HPA Pressure technology enables high viscosity product spraying.
This guide will help you to take the right path to a successful integration