Civil Aviation

Protective and functional coating for civil aircrafts & parts
CIVIL AVIATION Market
CIVIL AVIATION Market

Why you should choose SAMES KREMLIN

  • Knowledge and comprehensive process expertise
  • Ultimate field service and worldwide proximity support
image
finishing for aviation
(1a) PROTECTIVE COATING & FINISHING

High transfer efficiency atomizer for 1, 2 or 3K solvent- or water-based coating of aircraft exterior, fuselage, engine jet, metal & composite parts.

plane repaiinting
(1b) PAINT STRIPPER REPAINTING

Portable sprayer for paint stripper repainting & repair.

buffing and polishing aircraft
(1c) BUFFING & POLISHING

Portable sprayer for buffing & polishing compounds.

coating airplane structure
(2a) PROTECTIVE COATING

Spraying 1, 2 or 3K solvent- or water-based coating for airplane structures.

interior coating of aircraft
(2b) FINISHING

Spraying 1, 2 or 3K solvent- or water-based coating for interior, plastic, wood & composite materials. 

aircraft glass bonding
(3) SEALING & ENCAPSULATING

Dispensing 1K or 2K sealant for encapsulated windshields & windows.

sealing aircraft strucure reinforcement
(4A) Sealing and Bonding

Bonding of transverse structural parts and sealing of rivets with 2-component urethane or polysulfide to ensure corrosion protection.

aircraft tank sealing
(4B) Sealing and anticorrosive protection

Dispensing 2-component polysulfide rubber sealing on the leading edge of the tank.


Non-Destructive Testing

Non-Destructive Testing

The penetrant testing is a method to Non-Destructive Test (NDT) mainly used in aerospace. This method reveals the presence of discontinuities on any metal, ceramic & composite parts.

Fluorescent NDT is the branch that uses liquid and powder electrostatic guns.

This process is done in 2 or 3 steps with a SAMES KREMLIN solution.

Penetrant Testing Leaflet


Document PDFPenetrant Testing Leaflet - EN
(1) Penetrant application
(1) Penetrant application

Penetrant (from S1 to S4) applied in manual or automatic electrostatic spray:

  • Significant penetrant & air savings
  • Increase operator comfort
  • Easy to maintain
Nanogun MV HR
(2) Emulsifier

This step is only needed when post-emulsified penetrant has already been applied. 

Emusifier can be applied by conventional spraying or with the addition of electrostatic effect.

(3) Developer
(3) Developer

Electrostatic application of powder developer:

  • Very small & regular flow
  • Best market solution for defect detection
  • High transfer efficiency with stable pattern
  • 40 years of a proven solution with French aerospace OEM

E-JET2 NDT Low Developer Flow Application