에어스프레이 탱크 수동식 또는 자동식 스프레이 건의 경우
- 작업하기 쉬운 기능: 사용 편의성, 유지 관리 용이
- 새로운 프리미엄 어시터: 윤활유 없는 고성능
- 스마트 리드: 사용자 친화적 및 적응성
SAMES KREMLIN Airspray 탱크는 당신의 돈에 대한 최고의 가치를 제공하는 직설적이다. 그것들은 컵 건과 펌프 사이의 이상적인 해결책이다.
"쉽게 작업할 수 있는" 이점, 스마트 리드, 프리미엄 선동기, 감소된 유지보수로 우리는 매우 경쟁력 있는 가격으로 사용자에게 고유한 이점을 제공한다.
|압력비||1 : 1|
|최대 유체 압력||7 (100)||bar (psi)|
|최대 공기 압력||7 (100)||bar (psi)|
|공기 소비량||1.14 (0.67)||m³/h (cfm)|
|최대 온도||45 (113)||°C (°F)|
|습식 부품 스테인리스 스틸||♦|
|용량||2 (0.5) - 50 (13)||l (gal)|
|모터 유형 - 공압 - 방사형 피스톤 3개||♦|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.
폴리 우레탄 (PU 또는 PUR)은 고정 된 조성을 가진 단일 물질이 아니라 유사한 화학 물질을 공유하는 다양한 화학 물질입니다. 우레탄 또는 카바 메이트 연결로 연결된 유기 사슬 단위로 구성된 폴리머입니다. 대부분의 폴리 우레탄은 열경화성 폴리머이며, 열가소성 폴리 우레탄과 달리 가열 될 때 녹지 않습니다.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.