▶ 기술 책자
정전기 기술에 대한 우리의 70년의 전문 지식을 최대한 활용하여, SAMES KREMLIN은 고전압과 고전류를 모두 분사할 수 있는 유일한 정전기총을 개발하여 최적의 도료 충전과 효율적인 도료 수송을 인증했다. 이 조합은 이전 총 설계에 비해 최대 20% 높은 전송 효율을 제공한다.
Nanogun 에어스프레이는 저압 수동 정전기총으로 항공우주, 농업 및 건설, 금속 가구, 목재, 자동차 산업 등 많은 시장에 적합하다.
페인트는 펌프, 압력 탱크 또는 순환을 통해 총에 공급될 수 있다. 분무할 때 충전된 페인트 방울은 전기장의 선을 따라 부품으로 이동한다. 전기 공학은 페인트 절약과 포장 효과를 만들어 과잉 분사와 오염을 감소시킨다. 여기에 압축 공기를 추가하면 충치에 대한 침투력이 향상된다.
|최대 유체 압력||7 (101)||bar (psi)|
|최대 유체 배출구||750 (25)||cc/min (oz/min)|
|최소 유체 배출구||100 (3.38)||cc/min (oz/min)|
|최대 공기 압력||7 (101)||bar (psi)|
|최대 유체 온도||45 (113)||°C (°F)|
|트리거 잠금 안전||♦|
|추천 재료 점도 범위||14 - 50||s CA4|
|무게||488 (17)||g (oz)|
|ATEX||II 2 G 0.24 mJ|
|High Voltage Control Module||GNM6080: II (2) G [0.24 mJ]|
Format : application/pdf
Size : 529Ko
Format : application/pdf
Size : 19Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied & low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials & ferrous materials, although for ferrous components magnetic particle inspection is often used instead for its sub-surface detection capability.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing & sealing for composite & plastic parts
This solution is a simple concept supplying water-based paint to one painter with additional electrostatic effect.
This solution is a simple AIRSPRAY concept using our ISOCUBE for spraying water-based paint with an additional electrostatic effect