|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||7 (101)||bar (psi)|
|Maximum Air Pressure||7 (101)||bar (psi)|
|Maximum Fluid Temperature||45 (113)||°C (°F)|
|Weight||488 (17)||g (oz)|
|Recommended Material Viscosity Range||14 to 50||s CA4|
The ATEX regulation aims at improving the health & safety or workers potentially at risk from explosive atmospheres.
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
This technology ensures high transfer efficiency (minimum 65%) with a low pressure of atomizing air (0.7 bar maxi).
Size : 0Po
Format : application/pdf
Size : 529Ko
Format : application/pdf
Size : 19Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied & low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials & ferrous materials, although for ferrous components magnetic particle inspection is often used instead for its sub-surface detection capability.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
Protection, bonding, finishing & sealing for composite & plastic parts
This solution is a simple concept supplying water-based paint to one painter with additional electrostatic effect.
This solution is a simple AIRSPRAY concept using our ISOCUBE for spraying water-based paint with an additional electrostatic effect