For more than 35 years, the TRP gun has been the standard in the world of automotive finishing, often
copied but never equaled.
|Designation||Value||Unit: metric (US)|
|Maximum Material Pressure||10||bar (psi)|
|Standard Material Supply Pressure||6 - 8||bar (psi)|
|Maximum Paint Flow||1200||cc/min (gal/min)|
|Standard Paint Flow||800||cc/min (gal/min)|
|Minimum Paint Flow||200||cc/min (gal/min)|
|Maximum Air Pressure||6||bar (psi)|
|Air Consumption||14 - 80||m3/h|
|Transfer Ratio||30 - 60||%|
|Paint Resistivity (min-max)||>3||MOhm.cm|
|Viscosity Scale (min-max)||14 - 60||seconds FORD Cup#4|
|ATEX||II 2 G EEx > 350 mJ|
|High Voltage Unit||UHT152|
|High Voltage Control Module||GNM200 (ATEX: II (2) G [350 mJ < Ex < 2J])|
The ATEX regulation aims at improving the health & safety or workers potentially at risk from explosive atmospheres.
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing & sealing for composite & plastic parts