FPro G GSP Manual Airspray Spray Gun Gravity
- High quality spraying for viscous materials
- Modular gun for a large range of applications
- Ergonomic and robust design
The FPRO GSP designed by SAMES KREMLIN is the new star in the world of Airspray gravity-fed spray guns for thick viscous coatings. This innovative spray gun combines gravity and pressure technologies and is the best choice for applying high finish quality for thick materials like: adhesives, gel coats, thixotropic paint, and water-based materials. The FPro GSP is comfortable and easy to use. The gun is available already assembled or a kit is available for purchase to use with your FPro G spray gun.
SAMES KREMLIN showcases its innovative Vortex technology to improve transfer efficiency and spray pattern.) The FPro GSP delivers high spraying quality while maintaining the painter's wellness to fit all their application requirements and needs. SAMES KREMLIN engineers have designed the FPro GSP gun body to be well balanced, ergonomic and light. The concept of the FPro GSP makes it perfect for delivering an effortless spraying experience and easy clean-up at the end of your workday.
This new spray gun introduces a brand-new feature which delivers the lightest trigger pull in the market: MAG-trigger, the magnet assisted trigger which reduces the trigger pull up to 20%. This technology enhances once more the fact that SAMES KREMLIN cares about the painters comfort.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||1 (14.5)||bar (psi)|
|Minimum Fluid Outlet||170 (5.7)||cc/min (oz/min)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4" NPS|
|Polished Forged Aluminum Body||♦|
|Air Consumption CONV (at 2.5 - 3.5 bar / at 36 - 51 psi)||23.8 (14)||m3/h (cfm)|
|Tank Capacity||0.6 (0.16)||l (gal)|
|Weight||527 (18.6)||g (oz)|
|Cup capacity||0.6 (0.16)||l (gal)|
The MAG-trigger technology which is now available on the FPro G will reduce the trigger pull effect for a more comfortable spraying experience.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.