Airspray Fluid Hoses
- Exceptionally flexible
- The lightest hoses on the market
- Premium quality for guaranteed safety
These new Low-Pressure fluid hoses can be found exclusively in the SAMES KREMLIN network.
|Designation||Value||Unit: metric (US)|
|Temperature||-20 (-4) --> +50 (+122)||°C (°F)|
|Type of material||PEBD|
|Weight small diameter hose||31 (0.33)||g/m (oz/ft)|
|Weight medium diameter hose||44 (0.47)||g/m (oz/ft)|
|Weight large diameter hose||92 (0.99)||g/m (oz/ft)|
|Bending Radius small diameter hose||15 (0.59)||mm (in)|
|Bending Radius medium diameter hose||25 (0.98)||mm (in)|
|Bending Radius large diameter hose||35 (1.38)||mm (in)|
|Maximum Pressure||18 (261)||bar (psi)|
|Electrical Resistivity||< 1 000 000||Ω/m|
|Internal / External small diameter hose||3.2 (0.13) / 7.3 (0.29)||mm (in)|
|Internal / External medium diameter hose||6.4 (0.25) / 10.0 (0.39)||mm (in)|
|Internal / External large diameter hose||9.5 (0.37) / 14.8 (0.58)||mm (in)|
|Length||0.6 (2) --> 450 (1476)||m (ft)|
This technology ensures high transfer efficiency (minimum 65%) with a low pressure of atomizing air (0.7 bar maxi).
LVLP is an Airspray technology offering a good mix between conventional and HVLP atomization technlogies.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
Protection, bonding, finishing & sealing for composite & plastic parts