|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||480 (6960)||bar (psi)|
|Maximum Fluid Output||13.6||cc/mn (cfm)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Maximum Temperature||60 (140)||°C (°F)|
|Fluid Output at 30 cycles/mn||6.6 (1.74)||l/min (gal/mn)|
|Free Flow Rate||13.6 (3.59)||l/mn (gal/mn)|
|Air Consumption at 30 cycles/mn at 4 bar (60 psi)||190 (101.6)||m³/h (cfm)|
|Air Inlet||F 3/7" BSP|
|Fluid Outlet||M 3/4" JIC|
|Number of Cycles per liter of products||4.5|
|Height||136 (53.5)||cm (in)|
|Wetted Parts: Aluminum, Stainless Steel||•|
|Width||74 (29.1)||cm (in)|
|Depth||83 (32.7)||cm (in)|
|Sealing Packings Upper and Lower: Leather + PE||•|
|Weight||125 (275.6)||kg (lbs)|
|Designation||Version||Fluid inlet||Section rod||Drain rod||Paint filter||Air regulator||Seal||Part number|
|PUMP 80C220 CART MOUNTED UNIT WO HOSE WO GUN||Trolley||M 26x125||32 mm (1.1/4||-||♦||1||Lather + PE||151245980|
A Chevron packing set independently reacts to pressure & automatically affects a seal.
This technology involves reversing the process of the air motor to the pumps to avoid the pulse effect.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Anti-fouling paint, or bottom paint, is a specialized coating applied to the hull of a ship or boat to slow the growth of sub-aquatic organisms that attach to the hull & can affect a vessel's performance & durability.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.