Xcite™ Airmix® Manual Spray Gun
- Product savings & environmental protection
- Unsurpassed atomization quality of spraying
- Ergonomically designed for outstanding performance
SAMES KREMLIN created Airmix® technology in 1975. Airmix® is an intermediate spray technology that combines the finish quality of Airspray with the productivity of Airless® paint sprayer and is the industrial standard for Air-Assisted Airless® today. SAMES KREMLIN Xcite™ paint gun benefits of our latest expertise.
Airmix® spraying technology is the best compromise between productivity and finish quality with the highest transfer efficiency up to 86%, minimizing paint waste, increasing productivity, improving working conditions and preserving the environment.
|Benefits per technologies||Transfer efficiency||Atomization quality||Flow rate|
Our Xcite™ paint gun, formely known as Kremlin Rexson, has been sold worldwide since its first launching back in 2009. Our Xcite™ Airmix® paint spray guns range improves a lot the finish quality of your professional paint job projects. They are available with or without swivel fitting for improved maniability and performance. We supply a large number of spray gun kits with hoses and pumps, together with accessories. Our policy is to give you the most easy solutions to improve your performances with our paint gun while reducing overspray.
Airmix® (or Air Assisted Airless® ) gives a high finishing quality & uniform film build control for high productivity on paint flow rates from 400 to 2000 cc/min with a consistent spray pattern to perfectly atomize small to large amount of paints.
Fed by air compressors, Airmix® pumps (with powerful air motors) and paint guns, featuring all set-ups, with accurate fluid pressure regulator control, are ideal for atomizing most products. Our professional pumps can be fed by suction rods or gravity hoppers (cups) to meet any paint jobs. Our cup pumps are available in diiferent powers ranging from high output to smaller productions. Our Flowmax® pump - bellow technology - feeds spray gun with a constant and regular flow and no risk of leakage. Our very flexible fluid and air hoses improves the gun maniability. For any paint gun supplies, contact us.
Our Xcite™ Airmix® spray guns deliver a high transfer efficiency up to 86% (HVLP paint sprayer compliant). There are many reasons why transfer efficiency is so important:
Three Xcite™ Airmix® paint guns are available:
For higher operating pressures, please visit our section dedicated to Airless® paint sprayers. For any questions on the use of your Xcite™ Airmix® paint spray gun, the packaged solutions, paint gun accessories and the number of air caps and tips (nozzles) available, please contact us and we will be happy to assist you in detail!
Depending on the shape of your parts, it may be wise to take advantage of the wraparound effect of electrostatic to optimize the paint recovery without having to touch-up some areas of the parts. It is worth to know that our Airmix® technology is also available with electrostatic effect with our Nanogun Airmix® paint gun.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||120 - 200 - 400 (1740 - 2900 - 5400)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Recommended Air Pressure (min)||0.7 - 3 (11.6 - 43)||bar (psi)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4 NPS|
|Trigger Lock Safety||♦|
|Polished Forged Aluminum Body||♦|
|Stainless Steel, PTFE, Carbide Wetted Parts||♦|
|Fluid Swivel Fitting (available upon version)||x|
|Weight||579 (20)||g (oz)|
|Designation||Pressure||Aircap||Swivel fitting||Tip||Seat||Part number|
|XCITE 120||120 bar (1752 psi)||VX24||♦||TBD||SST||135720100|
|XCITE 200||200 bar (2920 psi)||VX24||♦||TBD||Carb||135720200|
|XCITE 400||400 bar (5840 psi)||VX24||♦||TBD||Carb||135720400|
|XCITE 120||120 bar (1752 psi)||VX24||-||TBD||SST||135720120|
|XCITE 200||200 bar (2920 psi)||VX24||-||TBD||Carb||135720220|
|Designation||Adjustable fan pattern||Part number|
|VX24 AIRCAP WITH GUARD||♦||132720420|
|VX24 KHVLP AIRCAP||♦||132720020|
|Designation||Setup||Pump||Pump filter||Suction rod||Hose length||Heater||Gun||Swivel fitting||Aircap||Tip||Part number|
|XCITE 120||-||-||-||-||7.5 m (24 ft)||-||Xcite 120||-||VX24||-||151260960|
|XCITE 200||-||-||-||-||7.5 m (24 ft)||-||Xcite 200||-||VX24||-||151260961|
|XCITE 120 +10C18||Wall||10C18||-||-||-||-||Xcite 120||-||VX24||-||151665700|
|XCITE 120 +10C18||Wall||10C18||-||-||7.5 m (24 ft)||-||Xcite 120||-||VX24||06.094||151665730|
|XCITE 120 +10C18||Tripod||10C18||-||7 mm ( 0,28 '')||7.5 m (24 ft)||-||Xcite 120||-||VX24||06.094||151665740|
|XCITE 120 +10C18||Tripod||10C18||-||7 mm ( 0,28 '')||7.5 m (24 ft)||-||Xcite 120||-||VX24||06.094||151665760|
|XCITE 120 +10C18||Tripod||10C18||-||7 mm ( 0,28 '')||7.5 m (24 ft)||-||Xcite 120||-||VX24||06.094||151665770|
|XCITE 120 +10C18||Wall||10C18||-||straight - 16mm||7.5 m (24 ft)||-||Xcite 120||-||VX24||06.094||151665780|
|XCITE 120 + 15C25||Wall||15c25||-||16 mm ( 0,63'')||7.5 m (24 ft)||-||Xcite 120||♦||VX24||-||151260974|
|XCITE 120 + 15C25||Wall||15C25||-||-||7.5 m (24 ft)||-||Xcite 120||♦||VX24||-||151260976|
|XCITE 120 + 15C25||Wall||15C25||-||16 mm ( 0,63'')||7.5 m (24 ft)||-||Xcite 120||-||VX24||-||151261001|
|XCITE 120 + 15C50||Wall||15C50||-||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 120||♦||VX24||-||151265050|
|XCITE 120 + 15C50||Wall||15C50||♦||-||7.5 m (24 ft)||-||Xcite 120||♦||VX24||-||151265052|
|XCITE 120 + 15C50||Wall||15C50||♦||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 120||♦||VX24||-||151265053|
|XCITE 120 + 17F60||Wall||17F60||-||-||7.5 m (24 ft)||-||Xcite 120||-||VX24||-||151260967|
|XCITE 120 + 20C50||Wall||20C50||♦||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 120||♦||VX24||-||151260973|
|XCITE 200 + 30C25||Wall||30C25||-||16 mm ( 0,63'')||7.5 m (24 ft)||-||Xcite 200||♦||VX24||-||151260975|
|XCITE 200 + 30C25||Wall||30C25||-||-||7.5 m (24 ft)||-||Xcite 200||♦||VX24||-||151260977|
|XCITE 200 + 30C25||Wall||30C25||-||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 200||♦||VX24||-||151260978|
|XCITE 200 + 30C25||Wall||30C25||-||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 200||-||VX24||-||151261002|
|XCITE 200 + 34F60||Wall||34F60||♦||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 200||♦||VX24||-||151260970|
|Xcite 200 + 35C50||wall||35C50||-||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 200||♦||VX24||12.11||151148400|
|Xcite 200 + 35C50||wall||35C50||♦||25 mm ( 1'')||7.5 m (24 ft)||-||Xcite 200||♦||VX24||12.11||151148450|
|XCITE 200 + 40C50||Wall||40C50||♦||16 mm ( 0,63'')||7.5 m (24 ft)||-||Xcite 200||♦||VX24||-||151260968|
|XCITE 200 + 40C50||Wall||40c50||♦||25 mm ( 1'')||7,5 m (24 ft)||♦||Xcite 200||♦||VX24||-||151260969|
|PACKAGE OF SEALS PRODUCT PART FOR XCITE GUN||129729901|
|PACKAGE OF SEALS AIR PART XCITE GUN||129729908|
|SERVICING KIT FOR XCITE 120 B GUN||129729920|
|SERVICING KIT FOR XCITE 200 B GUN||129729921|
|SEAL KIT FOR XCITE 400 B||129729941|
|SERVICE KIT FOR XCITE 400B||129729943|
|S/STEEL SCREEN NO 4 PKT FOR MR GUN||129609907|
|S/STEEL SCREEN NO 6 PKT FOR MR GUN||129609908|
|S/STEEL SCREEN NO 12 PKT FOR MR GUN||129609909|
|PACK 10 SEALS FOR S/S AND CARBIDE SEATS FOR JX-MX-MRX-XCITE||129629922|
|PACK OF 10 SEATS FOR XCITE GUN||129729904|
|PACK OF 2 SST SEATS FOR XCITE 120||129729905|
|SEAT-HOLDER ASSEMBLY (W/O SEAT) FOR XCITE GUN||129729907|
Since 1975, Airmix® combines conventional and high pressure Airless® technologies advantages. It is today's industry standard for medium pressure atomization.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
Zinc coatings when applied to blasted steel provide excellent anti-rust spray coating corrosion protection, weathering protection & very good resistance to salt water & solvents. Inorganic zinc coatings provide excellent anti-rust corrosion protection when used in chemical plants, refineries & coastal or offshore installations. This coating can provide even better corrosion protection when a top coat is applied. Inorganic zinc coatings are compatible with epoxies, phenolics, acrylics, silicones & many other coatings.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.
Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.
Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
This solution is a simple concept - with Xcite™ or Xcite™ Light Airmix® spray gun - for one or two painters. The design of the gun reduces the operator fatigue.