FPro S Airspray Conventional manual suction spray gun
- Breakthrough in Airspray technology
- Enhanced suction power
- Brand new suction cup options
FPro S Suction Feed - The New Standard in Airspray: In 1925 SAMES KREMLIN created Airspray technology. In 2017, we reinvented a technique to atomize paint with patented innovations for the Airspray market. How did we do this? We developed a new Vortex based on decades of experience with prestigious customer applications.
The PATENTED Vortex spins the paint pre-atomizing it resulting in a homogeneous spray pattern that allows for excellent penetration on complex-shaped parts. The pre-atomization of the rotating paint produced by the Vortex allows for lower atomizing air with the same excellent finish and less bounce back maximizing transfer efficiency.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Outlet||750 (26.3)||cc/min (oz/min)|
|Minimum Fluid Outlet||200 (7)||cc/min (oz/min)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Recommended Air Pressure (min)||2.5 (36) - 3.5 (51)||bar (psi)|
|Air Consumption||23 (13.5) - 29.7(17.5)||m3/h (cfm)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4" NPS|
|Fluid Inlet||M 3/8" NPS|
|Transfer Efficiency CONV||66||%|
|Weight||480 (16.9)||g (oz)|
|Designation||Technology||Nozzle size||Air consumption (m3/h)||Fluid output (cc/mn)||Max fan width at 20cm (8in)||Part number|
|Gun FPro S CONV Solo||CONV||-||-||-||-||135780000|
|Gun FPro S CONV-12-Mvb + aluminum cup||CONV||1.2 mm (0.047 in)||26.5 m3/h (15.6 cfm)||120 cc/mn (4.05 oz/mn)||20cm - 30cm (8in - 12in)||135780312|
|Gun FPro S CONV-15-Mvb + aluminum cup||CONV||1.5 mm (0.059 in)||26.5 m3/h (15.6 cfm)||215 cc/mn (7.3 oz/mn)||20cm - 30cm (8in - 12in)||135780315|
|Gun FPro S CONV-18-Mvb + aluminum cup||CONV||1.8 mm (0.071 in)||26.5 m3/h (15.6 cfm)||284 cc/mn (9.6 oz/mn)||20cm - 30cm (8in - 12in)||135780318|
|Gun FPro S CONV-23-Lvb + aluminum cup||CONV||2.3 mm (0.091 in)||27.2 m3/h (16 cfm)||340 cc/mn (11.5 oz/mn)||30cm - 40cm (12in - 16in)||135780423|
|Gun FPro S CONV-27-Lvb + aluminum cup||CONV||2.7 mm (0.106 in)||27.2 m3/h (16 cfm)||405 cc/mn (13.7 oz/mn)||30cm - 40cm (12in - 16in)||135780427|
|Complete Alu Suction cup for FPro S||1 L||138.400.000|
|Pack of filters (200µm) (x4)||138.310.300|
|Aircap FPro S Conv-23 27-Lvb||132.780.400|
|Aircap FPro S Conv-07 22-Mvb||132.780.300|
|Projector FPro S CONV-27-Lvb||131.780.427|
|Projector FPro S CONV-23-Lvb||131.780.423|
|Projector FPro S CONV-18-Mvb||131.780.318|
|Projector FPro S CONV-15-Mvb||131.780.315|
|Projector FPro S CONV-12-Mvb||131.780.312|
|Repair set for FPro S||129.780.901|
|Kit Suction booster valve||129.780.025|
|Kit Standard valve||129.030.020|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Subcontractors of the surface treatment and the coating process for the general industry
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
Protection, bonding, finishing & sealing for composite & plastic parts