FPro - the New Standard in Airspray: In 1925 SAMES KREMLIN created Airspray technology and in 2017, reinvented the way to atomize paint with patented innovations for the Airspray market. How did we do this? We developed a new axis based on decades of experience in prestigious customer applications.
The PATENTED pending innovative Restrictor controls and pre-atomizes the paint into smaller droplets. It also slows the paint speed down and allows time for the aircap to atomize the paint at the perfect droplet size thus avoiding any bounce back onto the part and increases the transfer efficiency. The PATENDED pending Vortex actually spins the paint, allowing high levels of penetration of the paint onto complex shaped parts. The path between the nozzle and the part becomes longer which slows down the paint avoiding any bounce back effect to the part. Therefore, the transfer efficiency is increased for optimal finish quality for all your projects.
| Benefits per technology | Atomization quality | Transfer efficiency | Flow rate |
|---|---|---|---|
| Conventional spraying |
|
|
|
| HVLP spraying |
|
|
|
| LVLP spraying |
|
|
|
The Fpro settings allow you to perfectly control and optimize the fan spray pattern for a perfect result.
For Wood Finishing, dye stains are essential to achieve the desired appearance for the wood finish product texture. Staining with Airspray pressure paint sprayers may lead to costly and time consuming rework!
The solution is to use the new FPro pressure-fed spray gun with its newly developed Restrictor and Vortex technologies to achieve:
The FPro paint gun combined with the Vortex and Restrictor technologies gives amazing results while saving products! The Fpro has all the settings to help you control spray. Those paint guns can be used with all air compressors and are recommended to spray varnishes, lacquers, shades, polyurethanes including two components.
The FPro P LP air spray gun are also pneumatic HVLP spray guns with a high transfer efficiency. A projector, model HVLP/LVLP can be fitted on the gun for small rates.
For higher rates, we recommend the use of projectors, model CONV-23 27-Lvb, CONV-23 27-Mvb, CONV-23 27-Srb and CONV-33 40-Srb. The FPro P CONV, with high spraying quality, enable to spray any kind of materials (low or high viscosity).
Note that if you are using UV paints, our Airless paint sprayers - combined with our Skill Tip technology - is recommended for applying UV paint and primer to solid wood & MDF wood.
Learn more on our Wood market specialized webpage!
The Fpro is avalable with a large choice of kits with either pressure pots, diaphragm or piston pumps with suction rods or gravity-fed cup including all accessories (filter, regulator). You will choose in our offer, the best solution for you to apply paint.
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Maximum Fluid Pressure | 6 | bar (psi) |
| Maximum Fluid Outlet | 750 (26.3) | cc/min (oz/min) |
| Minimum Fluid Outlet | 200 (7) | cc/min (oz/min) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Maximum Fluid Temperature | 50 (122) | °C (°F) |
| Air Inlet | M 1/4" NPS | |
| Fluid Inlet | M 3/8" NPS | |
| PH | 5-8 | |
| Tips / Nozzle | ♦ | |
| Recommended CONV Air Pressure | 2.5 (36) – 3.5 (51) | bar (psi) |
| Recommended HVLP/LVLP Air Pressure | 1,5 (22) – 2,5 (36) | bar (psi) |
| Air Consumption CONV (at 2,5 - 3,5 bar / at 36 - 51 psi) | 21.8 (12.8) – 28.2 (16.6) | m3/h (cfm) |
| Transfer Efficiency CONV | 66 | % |
| Transfer Efficiency HVLP/LVLP | 78 / 72 | |
| Wetted Parts: Stainless Steel, POM C, Polypropylene | ♦ | |
| Air Consumption HVLP/LVLP (at 1,5 – 2,5 bar / at 22 – 36 psi) | 16.1 – 23.5 (9.5- 13.8) | m3/h (cfm) |
| Weight | 480 (16.9) | g (oz) |
Format : application/pdf
Size : 838Ko
Format : application/pdf
Size : 11Mo
Format : application/pdf
Size : 2Mo
Format : application/pdf
Size : 1Mo
Format : application/pdf
Size : 220Ko
