|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Fluid Outlet||400 (14)||cc/min (oz/min)|
|Minimum Fluid Outlet||150 (5.3)||cc/min (oz/min)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Recommended Atomization Air Pressure||2.5 (36.2)||bar (psi)|
|Air Consumption||25 (14.7)||m3/h (cfm)|
|Weight||497 (17.5)||g (oz)|
|Trigger Air Pressure||3 (43.5)||bar (psi)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Std & Treated Stainless Steel Wetted Parts||♦|
|Power Supply on Gun Base (non-fitted supplied fitting)||♦|
|Fluid Inlet||F 1/4" NPS|
|Pilot Air Inlet||F 1/8" NPS|
|Atomizing Air Inlet||F 1/4" NPS|
|Pilot Air with Quick Fittings||♦|
Format : application/pdf
Size : 421Ko
Format : application/pdf
Size : 11Mo
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
Protection, bonding, finishing & sealing for composite & plastic parts
This simple concept is delivering different color to several automatic guns with temperature management.
Auto Color Low Pressure Automatic Color Change System is an automated paint/stain dispense system available for 4 through 19 color versions.