FStart G Gravity Airspray Spray Gun
- Good value for money
- Comfortable spray gun
- Easy to repair
SAMES KREMLIN's FStart G spray guns make it easy and cost-effective to apply water-based or solvent-based coatings.
FSTART sprayers are available to meet the needs of small to large finishing shops. The FStart G spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
The FStart spray guns are the result of 95 years of experience in Airspray technology. On top of being an economical cost solution, this new Airspray gun has a comfortable and ergonomic design and is one of the lightest guns in its class.
The FStart G is available with 3 aircaps in conventional, HVLP and LVLP Compliant to be in line with the European Standard DIN EN 13966-1 and EPA regulation in the United States
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4" NPS|
|Stainless Steel, Aluminum Wetted Parts||♦|
|Recommended CONV Air Pressure||2.5 (36) – 3.5 (51)||bar (psi)|
|Recommended HVLP/LVLP Air Pressure||1,5 (22) – 2,5 (36)||bar (psi)|
|Air Consumption CONV (at 2.5 - 3.5 bar / at 36 - 51 psi)||23.3 (13.7)||m3/h (cfm)|
|Air Consumption HVLP/LVLP (at 1.5 - 2.5 bar / at 22 - 36 psi)||20.4 (12)||m3/h (cfm)|
|Trigger Pull||16 (3.6)||N (lbs)|
|Tank Capacity||0.6 (0.16)||l (gal)|
|Weight||410 (14.5)||g (oz)|
|Designation||Technology||Nozzle size||Fluid output||Max fan width at 20cm (8in)||Part number|
|Gun FStart G CONV-13-Lva||CONV||1.3||140 cc/mn (4.7 oz/mn)||L: 30 - 40 cm (11.8 - 15.7 in)||135756213|
|Gun FStart G CONV-15-Lva||CONV||1.5||165 cc/mn (5.6 oz/mn)||L: 30 - 40 cm (11.8 - 15.7 in)||135756215|
|Gun FStart G CONV-18-Lva||CONV||1.8||220 cc/mn (7.4 oz/mn)||L: 30 - 40 cm (11.8 - 15.7 in)||135756218|
|Gun FStart G CONV-22-Lva||CONV||2.2||280 cc/mn (9.5 oz/mn)||L: 30 - 40 cm (11.8 - 15.7 in)||135756222|
|Gun FStart G COMPLIANT HVLP-13-Mva||HVLP||1.3||140 cc/mn (4.7 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756113|
|Gun FStart G COMPLIANT HVLP-15-Mva||HVLP||1.5||165 cc/mn (5.6 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756115|
|Gun FStart G COMPLIANT HVLP-18-Mva||HVLP||1.8||220 cc/mn (7.4 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756118|
|Gun FStart G COMPLIANT HVLP-22-Mva||HVLP||2.2||280 cc/mn (9.5 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756122|
|GUN FSTART G COMPLIANT LVLP-12-MVA||LVLP||1.2||95 cc/mn (3.2 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756612|
|GUN FSTART G COMPLIANT LVLP-13-MVA||LVLP||1.3||140 cc/mn (4.7 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756613|
|GUN FSTART G COMPLIANT LVLP-15-MVA||LVLP||1.5||165 cc/mn (5.6 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756615|
|GUN FSTART G COMPLIANT LVLP-18-MVA||LVLP||1.8||220 cc/mn (7.4 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756618|
|GUN FSTART G COMPLIANT LVLP-22-MVA||LVLP||2.2||280 cc/mn (9.5 oz/mn)||M: 20 - 30 cm (7.9 - 11.8 in)||135756622|
|Gravity Plastic cup for FStart||129756928|
|Designation||Gun||Hoses dimensions||Part number|
|Pack Airspray Lucky "FStart G HVLP + air hose"||FStart G HVLP-18-Mva||7.5m Air - ID8mm||152756280|
|Pack Airspray Lucky "FStart G CONV + air hose"||FStart G CONV-18-Lva||7.5m Air – ID6.5mm||152756380|
|AIRCAP FSTART G LVLP-12 18-MVA||132756610|
|AIRCAP FSTART G LVLP-22-MVA||132756620|
|Aircap FStart G CONV-1318-Lva||132756210|
|Aircap FStart G CONV-22-Lva||132756220|
|Aircap FStart G HVLP-1322-Mva||132756110|
|Maintenance kit for FStart G||129756901|
|NOZZLE + NEEDLE FSTART LVLP-12||131756312|
|NOZZLE + NEEDLE FSTART LVLP-13||131756313|
|NOZZLE + NEEDLE FSTART LVLP-15||131756315|
|NOZZLE + NEEDLE FSTART LVLP-18||131756318|
|NOZZLE + NEEDLE FSTART LVLP-22||131756322|
|Nozzle + Needle FStart CONV-13||131756213|
|Nozzle + Needle FStart CONV-15||131756215|
|Nozzle + Needle FStart CONV-18||131756218|
|Nozzle + Needle FStart CONV-22||131756222|
|Nozzle + Needle FStart HVLP-13||131756113|
|Nozzle + Needle FStart HVLP-15||131756115|
|Nozzle + Needle FStart HVLP-18||131756118|
|Nozzle + Needle FStart HVLP-22||131756122|
This compliant technology ensures high transfer efficiency (minimum 65%) with reduced atomizing air pressure of 0.7 bar maxi.
Compliant LVLP is an Airspray technology offering a good mix between conventional and HVLP atomization technlogies.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery