PPH 707 MS-GUN Robotic multi-process atomizer for solvent-based material
- Easy to switch process
- For validations of Bell/Gun on site
|Designation||Value||Unit: metric (US)|
|Maximum Material Pressure||10||bar (psi)|
|Standard Material Supply Pressure||6 - 8||bar (psi)|
|Maximum Paint Flow||1000||cc/min (gal/min)|
|Standard Paint Flow||400||cc/min (gal/min)|
|Minimum Paint Flow||100||cc/min (gal/min)|
|Maximum Air Pressure||6||bar (psi)|
|Paint Resistivity (min-max)||>3||MOhm.cm|
|High Voltage (maximum)||100||kV|
|Viscosity Scale (min-max)||14 - 60||seconds FORD Cup#4|
|ATEX Certification||II 2 G 350 mJ < Ex < 2J|
|High Voltage Unit||UHT157|
|High Voltage Control Module||GNM200/GNM300: II (2) G [350 mJ < Ex < 2J]|
The ATEX regulation aims at improving the health & safety or workers potentially at risk from explosive atmospheres.
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Protection, bonding, finishing & sealing for composite & plastic parts