PPH 707 ICWB & PPH 707 ICWB 2K Robotic sprayer for water-based material and insulated supply system
- Low material loss
- High reliability
- Easy to maintain
►For configurations and part numbers, please refer to the Documents tab.
►For configurations and part numbers, please refer to the Documents tab.
►For configurations and part numbers, please refer to the Documents tab.
1. High rotating speed whatever the paint flow for the finest atomizing
2. High voltage unit gives the maximum electrostatic effect for highest transfer efficiency possible
3. Hi-TE dual shaping air with patented mixing straight and vortex airs
4. Integrated 2K static mixer into the injector just behind the bell cup
5. The static mixer is located inside the injector, so the mixed volume lost when flushing is reduced.
6. Both Base & Hardener's valves are close to the static mixer for an fast mixing effect
7. Remote bell monitoring device avoid to spray without the bell cup, securing the painting process after a shut down.
8. Easy to upgrade PPH 707 ICWB to 2K (same TCP and body)
9. High reliability of every component (valves, high voltage, air motor, fittings, bell cup) for high production rate paintshop
10. Microvalves with bellow available for abrasive materials
11. Titanium bellcup for longer life, high resistance to abrasion
12. 7 years/30,0000h warranty turbine*
13. Easy disassembly of parts in contact with hardener
14. No mixed material in robot arm, no return back in the supply circuit
15. Magnetic bellcup fastening system : the easiest system on the market
16. Easy to maintain the full atomizer thanks to the Quick disconnect
*whichever is the sooner
The 2K version is equipped with the static mixer located just before the bellcup injector which helps to reduce the mixed paint volume to only 2cc.
Designation | Value | Unit: metric (US) |
---|---|---|
Weight | 6.06 (13.36) | kg (lbs) |
Viscosity Scale (min-max) | 20 - 40 | seconds FORD Cup#4 |
Standard Material Supply Pressure | 6 - 8 (87 - 116) | bar (psi) |
Maximum Material Pressure | 10 (145) | bar (psi) |
Minimum Paint Flow | 30 (.008) | cc/min (gal/min) |
Standard Paint Flow | 500 (.132) | cc/min (gal/min) |
Maximum Paint Flow | 1000 (.264) | cc/min (gal/min) |
Hardener Resistivity (min-max) | >10 | MOhm.cm |
Rotation Speed | 15 - 85000 | rpm |
Voltage Max | 100 | kV |
Current Max | 500 | µA |
ATEX Certification | II 3 G X T6 W > 2J | |
High Voltage Unit | UHT288 | |
High Voltage Control Module | GNM300: II (2) G [350 mJ < Ex < 2J] |