PPH 308 Automatic electrostatic rotary bell atomizer dedicated to solvent-base and water-based materials
- High Transfer Efficiency
- Excellent finishing & uniformity of film build
- Fast & Easy maintenance
The PPH 308 rotary bell atomizer is outfitted with a SAMES KREMLIN patented magnetic air bearing turbine. This atomizer has been designed for large Industrial applications, to spray electrostatically water-based, solvent-based or bi-component materials. Its versatility, resiliency and sturdiness make it the best choice for demanding industries and diverse manufacturing environments.
The paint is atomized by the centrifugal force resulting from the spinning at high speed of the bell cup driven by the turbine. The turbine allows reaching high rotation speed (up to 45000rpm) without any vibration, thanks to its multi-frequency damping system. The high rotation speed allows high finishing quality independently from viscosity and resistivity of the sprayed material. The droplets of paint are electrically charged from the edge of the bell cup and are transferred to the part to be painted in following the electrostatic field and with the air from shaping air shroud.
The air shroud permits adapting the pattern size and shape to the profile of parts being sprayed:
|Designation||Value||Unit: metric (US)|
|Maximum Material Pressure||10||bar (psi)|
|Maximum Paint Flow||500||cc/min (gal/min)|
|Minimum Paint Flow||30||cc/min (gal/min)|
|Maximum Air Pressure||10||bar (psi)|
|Rotation Speed||5000 - 45000||rpm|
|Viscosity Scale (min-max)(seconds FORD Cup#4)||15-45||s|
|ATEX Certification||SB: II 2 G 350 mJ < Ex < 2J|
|ATEX Certification||WB: II 3 G X T6 E > 2J|
|High Voltage Unit||UHT155|
|High Voltage Control Module||GNM200/GNM300 (ATEX: II (2) G [350 mJ < Ex < 2J])|
Electrostatic spraying brings significant advantages thanks to the wrap around effect.
The Vortex is a specific nozzle giving a Vortex effect in the paint line. The advantage is to have a better penetration in the complex shape parts by having a slower speed of paint particule.
Improving the transfer efficiency of painting atomizers has been the aim of the electrostatic effect since the 1950's.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing & sealing for composite & plastic parts