FPro Lock P Manual Spray Gun - Conventional, HVLP and LVLP
- New Standard in Airspray
- The lightest spray gun for high productivity
- Constant high performances for all production lines
FPro Lock P spray gun, the New standard in Airspray takes the guesswork out of operator set-up to achieve constant high finishing quality!
The FPro Lock with pre-set adjustments is ideal for repeatable operator performance. Its lightweight reduces operator fatigue for extended use and makes a very big difference for any manual paint line at the end of every shift.
The PATENTED pending restrictor controls and pre-atomizes the paint into smaller droplets. It slows down the paint speed and increases the transfer efficiency for even better finish quality. The PATENDED pending Vortex spins the paint improving uniformity of the spray pattern and allows paint penetration into complex-shaped part areas.
|Benefits per technology||Atomization quality||Transfer efficiency||Flow rate|
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Maximum Fluid Temperature||50 (122)||°C (°F)|
|Air Inlet||M 1/4" NPS|
|Fluid Inlet||M 3/8" NPS|
|Tips / Nozzle||♦|
|Recommended CONV Air Pressure||2.5 (36) – 3.5 (51)||bar (psi)|
|Recommended HVLP/LVLP Air Pressure||1.5 (22) – 2.5 (36)||bar (psi)|
|Air Consumption CONV (at 2,5 - 3,5 bar / at 36 - 51 psi)||21.8 (12.8) – 28.2 (16.6)||m3/h (cfm)|
|Transfer Efficiency CONV||66||%|
|Transfer Efficiency HVLP/LVLP||78 / 72|
|Wetted Parts: Stainless Steel, POM C, Polypropylene||♦|
|Air Consumption HVLP/LVLP (at 1,5 – 2,5 bar / at 22 – 36 psi)||16.1 – 23.5 (9.5- 13.8)||m3/h (cfm)|
|Weight||366 (12.9)||g (oz)|
The (patent pending) restrictor is an innovation from SAMES KREMLIN which enhances the Airspray technology.
This technology ensures high transfer efficiency (minimum 65%) with a low pressure of atomizing air (0.7 bar maxi).
LVLP is an Airspray technology offering a good mix between conventional and HVLP atomization technlogies.
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Subcontractors of the surface treatment and the coating process for the general industry
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
Protection, bonding, finishing & sealing for composite & plastic parts