CYCLIX 20-40 Drum Cover Agitators

Cyclix gear drive agitators for open top 20-40 liter drum featuring a stainless steel cover mounted on a single post elevator for quick material changes.

Constant quality of mixed materials
Stainless steel wetted parts
High ROI - no product lost

Where to buy?

Associated informations
- Description
- Equipment
- Accessories
- Kits
- Documents
- Instruction Manuals
- Materials
- Markets
- Solutions

Description

Constant quality of mixed materials
Stainless steel wetted parts
High ROI - no product lost

Performance

♦ Bi-directional jack for fast lift of stainless steel agitator cover (3 positions available)
♦ Quick material change
♦ Lubricated air motor - compact with adjustable speed and safe operation

Productivity

♦ Adjustable suction rod height
♦ User-friendly
♦ Agitator disengaged during elevator movement

Sustainability

♦ Stainless steel cover is compatible with all materials
♦ Suction and return tubes benefit suitable for re-circulating

The elevator is easy to install in paint kitchens, existing installations or an essential component of new installations.

Technical data table

Designation	Value	Unit: metric (US)
Rotation Speed	60 - 300 (5 - 90)	t/mn (rpm)
Maximum Air Consumption	up to 500 (3000 - 8000)	m3/h (cfm)
Liquid Paint Material	Solvent or water-based materials, high solids, etc

Equipment

Designation	Drum size	Agitator rod lenght (mm)	Paddle diameter (mm)	cover diameter (mm)	Part number
COVER	20-40 L / 5-11 Gl			400	154261600
40L AGITATOR	20-40 L / 5-11 Gl	400	134		154261700
SUCTION	20-40 L / 5-11 Gl				154261800

Accessories

Designation					Part number
2 L.DRUM - OIL HP 150 FOR DIAPHRAGM PUMP & OILER					149990017
DRUM ROLLER PLATE 200 L ONLY					151098100
ARI SUPPLY ASSEMBLY					154261930
SLOTTED PADDLE					154261952
AIR FILTER 1/4					154261996
AIR LUBRICATOR 1/4 + SUPPORT					154261997

Kits

Designation					Part number
40l ram					151081000

Documents

Select all documents

Leaflet CYCLIX 20-40 Drum Cover Agitators (English version) SAMES KREMLIN

Format : application/pdf
Size : 345Ko

Select the document

Airmix® Catalog 2020 Sames Kremlin

Format : application/pdf
Size : 7Mo

Select the document

Instruction Manuals

Select all documents

Cyclix II 40L | User manual

Format : application/pdf
Size : 12Mo

Select the document

Materials

Grease Silicone

Silicone grease is commonly used for lubricating & preserving rubber parts, such as O-rings. Additionally silicone grease does not swell or soften the rubber, which can be a problem with hydrocarbon-based grease. It functions well as a corrosion-inhibitor & lubricant for purposes that require a thicker lubricant. Thermal grease often consists of a silicone grease base along with added thermally conductive fillers. It is used for heat transfer abilities rather than friction reduction.

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Silicone Two-Component Sealant

Silicone sealants can be used in two or three components for increasing mechanical capabilities.

Polyurethane Sealant with Accelerator

Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.

Hybrid Sealant with Accelerator

Polyester

Polyester Powder Coatings allows long-term exterior durability, high performance mechanical properties & over-bake resistance. Polyester powder is widely used for decorative parts where a good resistance to sunlight (ultraviolet rays) are required. Many automotive trim components & other exterior parts are coated with polyester powders.

Nylon

Nylon is a thermoplastic. Meaning its chemistry does not change when it is melted to the metal part. Nylon will melt and re-melt if the metal part is heated again. Nylon coating powder is aesthetically attractive when applied properly but is never specified simply because it looks good. Costing more than 3 times the typical paint or powder finish, nylon is specified for functionality IE: slip, sound dampening, flange linings, and medical case brackets. Other types of parts we apply nylon to are: drive splines, glove box strikers, door strikers, seat springs, and various clips and clamps used in the aerospace and auto industries. Nylon powder for use in coating metal can be purchased in two chemistries: nylon 11 or nylon 12. What is the difference? The chemist may argue there are plenty of differences, however, practically speaking Nylon 12 is slightly less hygroscopic than Nylon 11 (less than 1%) Nylon 12 typically will have lower gloss, and nylon 12 may be slightly less expensive to purchase depending on the amount ordered. When buying nylon, gloss can not be specified. Generally, nylon 11 is around 70 gloss. Nylon 12 is typically 30 gloss. Gloss level will be the same batch to batch, and will only vary depending on the manufacturing process. Nylon is considered a "softer" coating, easily machinable, but can not be easily marked with a fingernail.

Polyurethane

Polyurethane powders have excellent flow characteristics with excellent chemical and mechanical properties. Outstanding corrosion resistance and excellent external exposure properties make them suitable alternative to polyester powders. GENERAL FEATURES Polyurethane powder contains polyurethanic resins cured with curing agents. The powder forms protective and decorative film along with enhanced outdoor resistance. The protective film have good resistance to mechanical damage, detergents, fuels and oils.

Anti-Corrosion Water-Based

Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.

Anti-Corrosion Epoxy Multi-Component

The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.

Anti-Corrosion Epoxy Zinc

Zinc coatings when applied to blasted steel provide excellent anti-rust spray coating corrosion protection, weathering protection & very good resistance to salt water & solvents. Inorganic zinc coatings provide excellent anti-rust corrosion protection when used in chemical plants, refineries & coastal or offshore installations. This coating can provide even better corrosion protection when a top coat is applied. Inorganic zinc coatings are compatible with epoxies, phenolics, acrylics, silicones & many other coatings.

Anti-Corrosion Epoxy Free Solvent

Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.

Anti-Corrosion Polyurethane Multi-Component

A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.

Anti-Corrosion Epoxy

Anti-Corrosion Epoxy is applied for active anti-corrosive & anti-rust protection of iron & steel surfaces that are to be coated. It is extremely hard & resistant to friction. It is particularly resistant to diluted acids, alkalis, petroleum products, some solvents, water, sea water, and more.

Bitumen

Bitumen is an oil-based substance. It is a semi-solid hydrocarbon product produced by removing the lighter fractions (such as liquid petroleum gas, petrol & diesel) from heavy crude oil during the refining process.

Anti-Corrosion Epoxy High Solid

Used for the steel structures of steel pipeline, steel frame, bridge & plant facilities for effective, long-term substrate protection.

Anti-Fouling

Anti-fouling paint, or bottom paint, is a specialized coating applied to the hull of a ship or boat to slow the growth of sub-aquatic organisms that attach to the hull & can affect a vessel's performance & durability.

Anti-Corrosion Polyurethane

Polyurethane coatings are often used for the corrosion protection of steel because they are particularly economical to apply. They dry quickly & can therefore be over-coated in short intervals. They can also be applied independently of the weather conditions & are resistant to impact.

Enamel Water-Based

Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.

Adhesive Polyurethane

Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.

Adhesive Polyurethane Multi-Component

Two-component polyurethanes (also called 2C PUR) have the advantages of single component polyurethane adhesives, but cure more quickly through larger gaps & are not dependent on moisture/heat for curing.

Adhesive Butyl

This adhesive is highly resistant & aggressive sticking to almost any substrate despite its easy fit application properties.

Adhesive MS Polymer

MS Polymers are the next generation of silicones & mastics. Unlike their counterparts these products adhere well to most substrates without the use for specific primers. By using these products you can reduce the risk of application mistakes.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.

Metallic Polyurethane Multi-Component

Polyurethane multi-component coatings offer a very high chemical/physical resistance & a very high steel effect.

Markets

Machine Tools

Protection & finishing applications

Containers

Protective coating for sea containers

Coil Coating

Liquid & powder coating on metallic coils

Molding

High transfer efficiency release agent coating for molding processes

Solar Energy

Bonding & sealing applications for solar panels & cells

Piping

Anti-corrosion & protective coating for piping structures

Handling Machines

Protective & finishing coating for handling & lifting machines

Marine Energy

Protective & anti-corrosion coating for sea power plant machines

Electronic Components

Technical coating for electronic components

Gas Tanks & Bottles

Liquid & powder protective coating for gas bottles & tanks

Wind Energy

Protective coating for windmill parts & components

Steel Drums

Protection, sealing & finishing for steel drums

Enamels

Liquid coating for enamel applications

Kitchen & Bath

Preparation & finishing for kitchen & bath market

Coffins

Bonding & finishing solutions for coffins

Aluminum Extrusions

Finishing & protective coatings

Cranes

Finishing & protective solutions

Harbor Lift Equipment

Anti-corrosion protection

Mining Machines

Protection, finishing, bonding & sealing for mining machinery

Steel Profile

High Performance Fluoropolymer liquid paint (PVDF) & powder coating

Forest Machines

Protection & finishing of forest machinery

Earth Moving Machines

Protection & finishing spray applications

Interior Plastic Parts

Bonding, adhesion, promotion & finishing for composite & plastic parts

Metallic Parts

Automotive Tier 1 metallic parts

Wheels

Primer, base & clear coat applications

Car Body Shop

Body shop handle bonding & anti-fluttering solutions

Powertrain - Gasketing

Sealing & gasketing of engine blocks & gearboxes

Automotive Refinishing

High quality spraying for repair shops

Exterior Plastic Parts for Automotive

Protection, bonding, finishing & sealing for composite & plastic parts

Bus

Protection, finishing, bonding & sealing solutions for bus

Harvesters

Protection, finishing, bonding & sealing for harvesters

Farming Trailers

Protection, finishing, bonding & sealing solutions for farming trailers

Sprayers

Protection, finishing, bonding & sealing for sprayers

Flat Glass & Windows

Sol-gel glass coating

Leather

Flatline coating equipment for leather skins

Metallic Furniture

Liquid & powder paint coating for metallic furniture

Bottles

Glass coating

Plastic Mass

Liquid paint coating for electronic plastics

Home Appliances

Paint and Powder coating for major domestic appliances

Motorcycles & Bicycles

Liquid & powder paint applications for cycling parts

Civil Aviation

Solutions for protection, bonding and finishing on interior and exterior parts

Railways

Protective coating, sealing & bonding applications for railway vehicles & parts

Cargo & Tankers

Anti-corrosion & protective coating for marine ships

Recreational Vehicles

Bonding & sealing solutions for recreational vehicles

Yachting

Protective & finishing coating for yacht & sea vessels

Defense

Protective & functional coating for military vehicles & equipment

Cruise Ships

Protective coating & finishing for cruise ships

Road Trailers

Anti-corrosion & protective coating for road trailers

Space

High finishing & protective coating for spacecraft & parts

Solutions

Heated colors for automatic spray gun

This simple concept is delivering different color to several automatic guns with temperature management.

Single component delivering on flat line

Flatline spraying system for 1K paint

Liquid paint kitchen

Semi-viscous pumping

CYCLIX 20-40 Drum Cover Agitators

Performance

Productivity

Sustainability

Technical data table

Leaflet CYCLIX 20-40 Drum Cover Agitators (English version) SAMES KREMLIN

Airmix® Catalog 2020 Sames Kremlin

Cyclix II 40L | User manual

Navigation

Follow us !