Airmix® Spray Tip - Fine Finish
- The finish quality of the Airspray with the productivity of the airless®
- Built with hard carbide
- Transfer efficiency of 86%
SAMES KREMLIN is a manufacture of high quality paint sprayer tips (airspray, airmix, airless® ...) since 1925. We offer a great number of tip models for each job, with a selection of tip sizing to evenly paint any part surface, small or large (interior or exterior paints…) and always apply the right amount of product for cleaner environment areas . To make sure that every tip built in our factory yields the best results, we follow a precise machining process - especially for the tip hole (orifice) determining the flowrate. That guarantees consistent material output at different spray fan angles each & every time.
Each tip/nozzle is tested for a great result, whatever the applied product (primer, stains, paint, enamels, varnishes, latex, oils….). Our tips are built with carefully selected materials to guarantee optimum results. The size of our tips - defined by the orifice/hole diameter - allows to achieve small, medium or larger fan width spray pattern to meet any job requirement . It is very important to maintain optimal conditions to prevent any plugging (filters fiited with the right strainers, to be replaced frequently for maximum coverage results).
Choosing the right tip and determining its code part number depends on the paint or material you are using (fluid or thick material...). We suggest you read carefully our Airmix® (air assisted airless® ) guides. Please contact our sales representatives which will help you choose your replacement tip! Discover on our website, all the technical characteristics of our wide selection of spray tip/nozzle with the right code number to build your part number depending of the fan size by consulting the dedicated product pages.
Format : application/pdf
Size : 445Ko
Format : application/pdf
Size : 7Mo
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Some anti-corrosion materials are available in water-based versions. These green paints have a longer dry time, but meet most environmental requirements & have excellent protective qualities.
Solvent-free epoxy coatings are designed for long-term protection of steel & concrete structures against corrosion, abrasion & chemical attack. Operating temperature ranges from –40F to 1040F.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.
Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery