FStart P Pressure Airspray Spray Gun
- Good value for money
- Comfortable spray gun
- Easy to repair
SAMES KREMLIN's FStart P spray guns make it easy and cost-effective to apply water-based or solvent-based coatings.
HVLP & Conventional sprayers are available to meet the needs of small to large finishing shops. The FStart P spray guns can be used by both beginners and experienced professionals giving a desired high-quality finish.
The FStart spray guns are the result of 95 years of experience in Airspray technology. In addition to being an economical solution, this new Airspray gun has a comfortable and ergonomic design and is one of the lightest guns in its class.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Inlet||M 1/4" NPS|
|Fluid Inlet||M 3/8" NPS|
|Stainless Steel, Aluminum Wetted Parts||♦|
|Recommended CONV Air Pressure||2.5 (36) – 3.5 (51)||bar (psi)|
|Recommended HVLP/LVLP Air Pressure||1,5 (22) – 2,5 (36)||bar (psi)|
|Air Consumption CONV (at 2.5 - 3.5 bar / at 36 - 51 psi)||22.1 (13)||m3/h (cfm)|
|Air Consumption HVLP/LVLP (at 1.5 - 2.5 bar / at 22 - 36 psi)||19.4 (11.4)||m3/h (cfm)|
|Trigger Pull||16 (3.6)||N (lbs)|
|Weight||402 (14.2)||g (oz)|
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery
Protection, bonding, finishing & sealing for composite & plastic parts