35C50 Airmix® Paint pump
- Designed for long-lasting industrial use
- Fast color changes with minimum solvent consumption
- Simple design to minimize maintenance time and operation
The 35C50 Airmix® paint pump will deliver excellent performance and outstanding benefits because of our proven pumping technology. With a powerful air motor, the 35C50 can feed up to (2) Airmix® or (2) SFlow™ Airspray spray guns. It can handle material viscosities from 20 cps up to 5000 cps with very low air consumption. It comes with an optimized volume fluid section for fast color changes with minimal material loss.
The 35C50 Airmix® paint pump packages are available in wall-mount versions with cart mounting as an option. Packages are available with (1) Xcite™ 200 bar Airmix® manual spray gun equipped with a 12.114 tip and 7.5 m (25ft) air and fluid hoses. An Airless version with the SFlow™ spray gun is also available. A large variety of options are available to meet all customer requirements.
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||210 (3000)||bar (psi)|
|Recommended Fluid Output||1500 (0.4 gal/min)||cc/mn (cfm)|
|Maximum Fluid Output||3000 (0.8 gal/min)||cc/mn (cfm)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||15||m³/h (cfm)|
|Maximum Temperature||60 (140)||°C (°F)|
|Fluid Output at 30 cycles/mn||1.5 (0.4)||l/min (gal/mn)|
|Fluid Volume Per Cycle||50 (0.013 gal)||cc (oz)|
|Free Flow Rate||5 (1.3)||l/mn (gal/mn)|
|Fluid Output at 15 Cycles||750 (0.19 gal/min)||l/mn|
|Seal Packings||PE UHMW|
|Height||58.5 (23)||cm (in)|
|Width||15.9 (6.25)||cm (in)|
|Depth||16 (6.29)||cm (in)|
|Wetted parts stainless steel||♦|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery