20C100 Airmix® Paint Pump
- Ideal for Airmix® applications
- High efficiency pump for maximum energy savings
- Optimized construction for simple & quick maintenance
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||120 (1740)||bar (psi)|
|Maximum Temperature||60 (140)||°C (°F)|
|Fluid Output at 30 cycles/mn||3 (0.8)||l/min (gal/mn)|
|Fluid Volume per Cycle||100 (3.4)||cc|
|Air Consumption at 30 cycles/mn at 4 bar (60 psi)||21.6 (12.7)||m³/h (cfm)|
|Air Inlet||F 3/8" BSP|
|Fluid Outlet||M #5 JIC|
|Fluid Inlet||M 26x125|
|Number of Cycles per liter of products||10|
|Sealing Packing Upper PTFE G - Polyfluid||♦|
|Wetted Shares: Stainless Steel||♦|
|Weight||22 (48.5)||kg (lbs)|
|Designation||Version||Fluid inlet||Section rod||Drain rod||Paint filter||Air regulator||Seal||Motor||Part number|
|20C100||wall||M 26x125||-||-||-||2||GT + PTFEG||std||151780000|
|20C100||wall||M 26x125||25 mm (1'')||-||-||2||GT + PTFEG||std||151780100|
|20C100||wall||M 26x125||25 mm (1'')||♦||♦||2||GT + PTFEG||std||151780200|
|20C100||Troley||M 26x125||25 mm (1'')||♦||♦||2||GT + PTFEG||std||151780400|
|20C100T||wall||M 26x125||-||-||-||2||GT + PTFEG||Turbo||151782100|
|DRAIN ROD D16 S/S CONNECTOR 18X125||049596000|
|TROLLEY 2 ARMS||051221000|
|TROLLEY 1 ARM||051730110|
|BRACKET W. STRAPS||056100199|
|SUCTION ROD DIAM 25 (FITTINGS 26*125) FOR EOS PUMP||149596150|
|SUCTION ROD D25 (FITTINGS 26x125) FOR 200 L DRUM||149596160|
|EQUIPPED FILTER 3/8 O'RING SEAL W.SCREEN 6||155580300|
|SET OF GT SEALS FOR HYDRAULIC C100 GT||144960091|
|SERVICING KIT FOR HYDRAULIC C100 GT||144960096|
|PACKAGE OF SEALS FOR 1000/4 AIR MOTOR||146270991|
|SERVICING KIT FOR MOTOR 1000-4||146270995|
|PACKAGE OF SEALS FOR FLUID SECTION C100 CHEVRON||144960090|
|SERVICING KIT FOR HYD C100 CHEVRON||144960095|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
Format : application/pdf
Size : 7Mo
Format : application/pdf
Size : 520Ko
Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.
A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.
UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.
Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.
UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.
The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.
The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery