|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||100 (1450)||bar (psi)|
|Recommended Fluid Pressure||bar (psi)|
|Maximum Fluid Output||cc/mn (cfm)|
|Minimum Output||cc/min (cc/oz)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||11 (6.5)||m³/h (cfm)|
|Weight||20 (48)||kg (lbs)|
|Maximum Temperature||50 (122)||°C (°F)|
|Sealing packing bellows polyethylene||♦|
|Cylinder||60 (2)||cc (oz)|
|Weighted Sound Level||75.5||dBA|
|Recommended Air Pressure||2 - 5 (29 - 72.5)||bar (psi)|
|Fluid Output at 30 cycles/mn||1.8 (0.48)||l/min (gal/mn)|
|Fluid Output at 20 cycles/mn||1.2 (0.32)||l/mn (gal/mn)|
|Fluid Volume Per Cycle||60||cc (oz)|
|Free Flow Rate||3.6 (0.96)||l/mn (gal/mn)|
|Fluid Output at 15 Cycles||0.9 (0.24)||l/mn|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||11||m³/h (cfm)|
|Displacement Per Cycle||60 (3.65)||cc (cubic inch)|
|Air Inlet||F 1/4" BSP / F 3/8" BSP|
|Fluid Outlet||F 3/8" NPS / M1/2" JIC|
|Fluid Inlet||F 1/2" BSP / M26x125|
|Number of cycles per liter of products||16|
|Sealing packing upper and lower GT polyethylene||♦|
|Height||62 (24.5)||cm (in)|
|Width||33 (13)||cm (in)|
|Depth||21 (8.3)||cm (in)|
|Wetted parts hard chrome SST, standard SST, carbide||♦|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Format : application/pdf
Size : 7Mo
Format : application/pdf
Size : 400Ko
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery