15C25 Airmix® Paint Pump
- Efficiency: perfect for Airmix® finish
- Optimization: built with minimal parts
- Simplicity: lowest cost of ownership
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||90 (1305)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||2.8 (1.65)||m³/h (cfm)|
|Maximum Temperature||60 (140)||°C (°F)|
|Weighted Sound Level||71.2||dBA|
|Recommended Air Pressure||2 - 5 (29 - 72.5)||bar (psi)|
|Fluid Output at 30 cycles/mn||0.75 (0.2)||l/min (gal/mn)|
|Fluid Output at 20 cycles/mn||0.5 (0.13)||l/mn (gal/mn)|
|Fluid Volume per Cycle||25||cc|
|Free Flow Rate||1.5 (0.39)||l/mn (gal/mn)|
|Fluid Output at 15 cycles / mn||0.375 (0.01)||l/mn (gal/mn)|
|Air Consumption at 30 cycles/mn at 4 bar (60 psi)||2.8||m³/h (cfm)|
|Displacement Per Cycle||25 (1.52)||cc (cubic inch)|
|Air Inlet||F3/8" BSP / F3/8" BSP|
|Fluid Outlet||F 3/8 " NPS / M1/2 JIC|
|Fluid Inlet||F 1/2 " BSP / M26x125|
|Hard Chrome Stainless Steel, Wetted Parts||♦|
|Number of Cycles per liter of products||40|
|Sealing Packing Upper and Lower GT polyethylene||♦|
|Height||57.5 (22.6)||cm (in)|
|Width||32 (12.6)||cm (in)|
|Depth||17 (6.69)||cm (in)|
|Wetted Shares: Stainless Steel||♦|
|Weight||7.7 (17)||kg (lbs)|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Format : application/pdf
Size : 7Mo
Format : application/pdf
Size : 382Ko
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery