Efficiency - perfect for Airmix® finish
Optimization - built with minimal parts
Simplicity - lowest cost of ownership
Efficiency - perfect for Airmix® finish
Optimization - built with minimal parts
Simplicity - lowest cost of ownership
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 15/1 | |
| Maximum Fluid Pressure | 90 (1305) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Air Consumption | 2.8 (1.65) | m³/h (cfm) |
| Weight | 7.7 (17) | kg (lbs) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Cylinder | 25 (0.84) | cc (oz) |
| Weighted Sound Level | 71.2 | dBA |
| Recommended Air Pressure | 2 - 5 (29 - 72.5) | bar (psi) |
| Fluid Output at 30 cycles/mn | 0.75 (0.2) | l/min (gal/mn) |
| Fluid Output at 20 cycles/mn | 0.5 (0.13) | l/mn (gal/mn) |
| Fluid Volume Per Cycle | 25 | cc (oz) |
| Free Flow Rate | 1.5 (0.39) | l/mn (gal/mn) |
| Fluid Output at 15 Cycles | 0.375 (0.01) | l/mn |
| Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) | 2.8 | m³/h (cfm) |
| Displacement Per Cycle | 25 (1.52) | cc (cubic inch) |
| Motor Type | 245-4 | |
| Air Inlet | F3/8" BSP / F3/8" BSP | |
| Fluid Outlet | F3/8" NPS / M1/2" JIC | |
| Fluid Inlet | F 1/2 " BSP / M26x125 | |
| Hard Chrome Stainless Steel, Wetted Parts | ♦ | |
| Number of cycles per liter of products | 40 | |
| Sealing packing upper and lower GT polyethylene | ♦ | |
| Height | 57.5 (22.6) | cm (in) |
| Width | 32 (12.6) | cm (in) |
| Depth | 17 (6.69) | cm (in) |
| Wetted parts stainless steel | ♦ |
Format : application/pdf
Size : 382Ko
Format : application/pdf
Size : 1Mo
Format : application/pdf
Size : 744Ko
Format : application/pdf
Size : 3Mo
