The 01D140 pneumatic, double diaphragm pump is designed for fluid transfer and small circulating systems with 1:1 ratios. These pumps will deliver high performance and long-term reliability.
The 04D140 pneumatic, double diaphragm pump is designed for low-pressure circulating systems with a ratio of 3.5:1. These pumps will deliver high performance and durability.
The 55 Gallon Drum Agitator with gear driven air motor is used in small & large paint kitchens with the most robust elevator in the industry.
The automatic A28 low pressure spray gun benefits from the patented Superlife technology, recommended for enamels, high solids & solvent-free materials and strongly improving the wet parts lifetime.
This regulator has been designed to keep a constant pressure and a minimum product speed in a paint circulating line.
SAMES KREMLIN's new fluid hoses bring unique advantages to the end user because they are exceptionally lightweight and flexible.
The use of this manual control pressure regulator is the best way to get a high working precision. With continuous control of the product pressure a constant production quality can be achieved. Designed for low to medium viscosity materials.
The manual drive regulator with integrated pilot allows to keep a constant pressure. The use of this regulator is the best way to get a very high working precision. With the continuous control of the product pressure, it allows a constant production quality. Designed for low to medium viscosity materials.
This regulator can be piloted directly by pressurized air, allowing to change the product pressure at any time on the assembly line. Designed for low to medium viscosity materials.
This regulator can be piloted directly by pressurized air, allowing to change the product pressure at any time on the assembly line. Designed for medium viscosity materials, this piloted control regulator is non stick coating.
SAMES KREMLIN Airspray Tanks are dedicated to all the applications: from a light aluminum 2L (0.5 gal) to feed a touch-up gun to a heavy duty 7 bar (100 psi) 50L (13 gal) stainless steel tank for high production.
The AP 1000 resistivohmeter is specially designed to quickly and accurately measure the resistivity (in ohm.meter) of the paints & clear coats applied by electrostatics. The resistivity is a quite significant factor The must-have tool for electrostatic paint and clear coat application Provides facts and data to help paint optimization for all users of electrostatic painting (in laboratories, sub-suppliers control departments, integrated paint process).
Cyclix gear drive agitators for open top 20-40 liter drum featuring a stainless steel cover mounted on a single post elevator for quick material changes.
Cyclix gear drive agitators for open top 200 liter (55 gal) drum featuring a stainless steel cover mounted on a single post elevator for quick material changes.
Perfectly balanced, the FPro WBE spray gun provides a superior finish for all painters and is designed for spraying water-based porcelain and ceramics. SAMES KREMLIN offers the largest range of spray guns and accessories for all FPro applications in the high finishing markets.
The ISOCUBE AUTO is an insulating cabinet designed by SAMES KREMLIN for electrostatic application of waterborne and non-flammable products by automatic sprayers. With a maximum paint capacity of 60 liters, the Isocube Auto will achieve an incomparable spraying time and will supply up to two sprayers. The Isocube Auto is available with only one reference!
The side mounted Isolation Table allows coating and pumping systems to be isolated from the ground. It is used for multiple small pumps to feed out of 5 gallon pails.
M22 P HPA offers the widest projector choice to answer to most conventional spray needs. It is recommended for high-volume conventional spray applications or for high viscosity material.
M22 P HTV uses SAMES KREMLIN's unique Vortex technology to enhance low viscosity material spraying on sharply profiled surfaces. It is also HVLP compliant.
M22 P HVLP delivers a very high finish quality for low viscosity material and optimizes transfer efficiency with an outstanding operator comfort.
The M22 P WBE HPA is a reinforced gun designed to resist to highly-abrasive water-based coatings in time. The HPA technology allows its use for high-volume conventional spray or high viscosity material applications.
PDM 175 is a large capacity diaphragm pump, it is ideal for low pressure circulatings and feeding automatic guns.
PMP150 is our easiest pumping solution. It is a diaphragm pump (for application requiring a 1:1 ratio) and can be used with adhesive, medium viscosity or harsh coating.
The PMP 150 E is a diaphragm pump with a 1:1 ratio, which benefits from special balls and seats to pump abrasive water-based coatings.
The PMP 150 Transfer is a diaphragm pump, designed for fluid transfer applications. It can be used with low to medium viscosity material.
The S3 G is our most compact and light gun, designed for tight area applications and where touch-ups are required. It is also an ideal solution for small hands.
The S3 G is our most compact and ligth gravity gun designed for tight area applications and where touch-ups are required. S3 G HTI is the least energy consuming gun, and is HVLP compliant.
The S3 P is our most compact and lightest gun, designed for tight area applications and where touch-ups are required. HPA Pressure technology enables high viscosity product spraying.
This guide will help you to take the right path to a successful integration