♦Easy to work plug and spray concept including pumping, metering and electronic
♦Quality of mixed materials thanks to the direct injection in the high performance unique design static mixer (INJECTMIX technology)
♦Unsurpassed +/- 1% mixing accuracy due to the innovative pump changeover technology
♦The electronic alerts if needed and constantly monitors the material consumption and calculates the VOC
♦Easy and quick learning thanks to the intuitive use
♦Production stop prevented thanks to the design without flow meter
♦Constant fluid flow rate thanks to the SAMES KREMLIN Pulse Free Electronic Control (PFE)
♦Low cost of ownership for fast Return On Investment (ROI)
♦Durability due to the FLOWMAX® bellow technology on the catalyst side preventing any leaks for moisture sensitive materials
|Designation||Value||Unit: metric (US)|
|Electrical Power||110/220-40||V - W|
|Ratio||1/1 - 100/1||X/1|
|Maximum Fluid Pressure||6 (87)||bar (psi)|
|Maximum Fluid Output||2000 (67)||cc/min (oz/min)|
|Minimum Output||3 (0.1)||cc/min (oz/min)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Maximum Temperature||60 (140)||°C (°F)|
|Air Inlet||3/4 NPT|
|Fluid Outlet||1/2" JIC|
|Number of Mixed Products||2||2K|
|Fluid Viscosity (min-max)||120s (0-10000cps)||in CA4 seconds (or centipoise cps)|
|Stainless Steel, PEHD Wetted Parts||x|
|Number of A Components||1||Min/Max|
|Number of B Components||1||Min/Max|
|Number of A Component Solvents||1||Min/Max|
Pulse-Free Electronic Control (PFE) acts on unique pump changeover technology to ensure consistent metering.
Used in every SAMES KREMLIN electronic or mechatronic dosing machine, Injectmix technology allows injecting a custom catalyst volume into a continuous flow of base - directly in a high performance mixer, thus guaranteeing the mixing quality.
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Format : application/pdf
Size : 518Ko
Format : application/pdf
Size : 11Mo
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
The Anti-Corrosion Epoxy Multi-Component product is highly resistant to marine & industrial environments, buried conditions, ground water, effluents, salt water & a wide range of oils & chemicals.
A two-component efficient coating product, used as first layer on metallic surfaces & in a wide range of painting systems. Forms an excellent quality anti-corrosive polyurethane film, ensuring the adherence between the surface & the next layer of the painting process.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery