10C50 GT Airmix® Paint Pump
- Ideal for Airmix® applications
- High efficiency pump for maximum energy savings
- Optimized construction for simple & quick maintenance
|Designation||Value||Unit: metric (US)|
|Maximum Fluid Pressure||60 (870)||bar (psi)|
|Maximum Air Pressure||6 (87)||bar (psi)|
|Air Consumption||5.4 (3.2)||m³/h (cfm)|
|Weight||17 (37.5)||kg (lbs)|
|Maximum Temperature||60 (140)||°C (°F)|
|Cylinder||50 (1.69)||cc (oz)|
|Recommended Air Pressure||2 - 5 (29 - 72.5)||bar (psi)|
|Fluid Output at 30 cycles/mn||1.5 (0.4)||l/min (gal/mn)|
|Fluid Output at 20 cycles/mn||1.0 (0.26)||l/mn (gal/mn)|
|Fluid Volume Per Cycle||50||cc|
|Free Flow Rate||3.0 (0.78)||l/mn (gal/mn)|
|Fluid Output at 15 Cycles||0.75 (0.2)||l/mn|
|Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)||5.4||m³/h (cfm)|
|Displacement Per Cycle||50 (3.05)||cc (cubic inch)|
|Air Inlet||F3/8" BSP / F3/8" BSP|
|Fluid Outlet||F 1/2" NPS / M1/2" JIC|
|Fluid Inlet||F 1/2" BSP / M26x125|
|Number of cycles per liter of products||20|
|Sealing packing upper and lower GT polyethylene||♦|
|Height||82 (32.3")||cm (in)|
|Width||35 (13.8")||cm (in)|
|Depth||21 (8.3 ")||cm (in)|
|Wetted parts hard chrome SST, standard SST, carbide||♦|
This technology represents a new generation of sealing designed to extend the life of a pump piston.
2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.
Format : application/pdf
Size : 499Ko
Format : application/pdf
Size : 7Mo
Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.
Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.
Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.
Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.
Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.
Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.
Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.
Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.
Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.
Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.
Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.
Protection, bonding, finishing, dispensing & sealing for interior & exterior joinery